Optimus SSM-1250, 32-3009 owner manual Care and Maintenance

Page 20

32-3009.fm Page 20 Tuesday, August 10, 1999 8:31 AM

CARE AND MAINTENANCE

Your Optimus SSM-1250 3-Channel Stereo Audio Mixer is an example of superior design and craftsmanship. The following suggestions will help you care for your mixer so you can enjoy it for years.

Keep the mixer dry. If it gets wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits.

Use and store the mixer only in normal temperature environments. Temperature extremes can shorten the life of electronic devices and distort or melt plastic parts.

Keep the mixer away from dust and dirt, which can cause premature wear of parts.

Handle the mixer gently and carefully. Dropping it can damage circuit boards and cases and can cause the mixer to work improperly.

Wipe the mixer with a damp cloth occasionally to keep it looking new. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the mixer.

Modifying or tampering with the mixer’s internal components can cause a mal- function and might invalidate your mixer’s warranty. If your mixer is not performing as it should, take it to your local RadioShack store for assistance.

20

Image 20
Contents SSM-1250 Fm Page 2 Tuesday, August 10, 1999 831 AM Contents Features Illustration of mixer back Connecting Outputs Connecting InputsPreparation Illustration of output AMP to sound systemFm Page 7 Tuesday, August 10, 1999 831 AM Illustration of lamp being connected Connecting PowerConnecting a Lamp Listening Safely Connecting HeadphonesIllustration of headphones being connected Presetting the Input Signal Levels Illustration of Power button w/indicator litOperation IllustrationPresetting the Microphone Presetting the Channel 1/2/3 Input SourcesIllustration of VU meters at Illustration of mixer front w/arrow to controlIllustration of Phono 1/LINE 1 set to Phono Illustration of CH 1 controlIllustration Line 3/LINE 4 set to Line Illustration of Phono 2/LINE 2 set to PhonoIllustration of CH 2 control Checking the Sound Illustration of CH 3 controlMixing the Inputs Playing One Input SourceMonitoring a Second Input Source Illustration of Assign a set to 1 and Cross Fader set to aIllustration of Cross Fader w/arrow from a to B Switching to the Second Input SourceIllustration of CUE Assign with arrow to CH Using Talkover Illustration of switch set to TalkoverUsing the Tone Controls Troubleshooting Problem Possible SolutionCare and Maintenance Replacing the Fuse Specifications 03%Fm Page 23 Tuesday, August 10, 1999 831 AM RadioShack Division of Tandy Corporation Fort Worth, Texas