Pioneer X-MT2000 manual Playing CDs

STANDBY TUNING

1	)	!	Ú￿
		$	Ý￿

STANDBY/ON	2	)	&
BASS/TREBLE
	3	)	#*

CD SELECT OPEN/CLOSE

	6
4	¢￿

7

1	2		CD 1
			3
4	5		6
7	8		9
10/0	>10
	VOL	U
			ME
	+
BASS			TRE
	—
	VOLUME

REMOTE CONTROL UNIT

16

Playing CDs

The 3-disc changer lets you play up to three CDs back-to-back (or at random, or in your own programmed order), and you can even change discs while another one is still playing.

The basic features are explained here; more features are covered in chapter 5 starting on page 19.

1Press 0 for disc 1 on the top panel to open disc tray 1.

The unit automatically switches on when you press any of the 0 (OPEN/CLOSE) buttons.

2Load a CD.

Make sure that the label is face-up and that the CD is seated properly in the disc guide.

•Don't use an adaptor with 8cm CD singles as it may damage the player.

•Don’t load more than one disc at a time in a disc guide.

3Press 0 for disc 1 to close disc tray 1.

4Press CD SELECT 1 (top panel) or CD1 (remote) to start playing disc 1.

The current disc indicator shows which disc is selected.

You can use the CD SELECT buttons (CD1, CD2 and CD3 on the remote) to automatically switch on the system from standby and start playing a CD if there’s one loaded.

5Adjust the volume and tone to your liking.

Use the volume control on the front panel, or the VOLUME + and VOLUME Ð buttons on the remote to adjust the volume.

To adjust the tone, first press BASS or TRE on the remote, then use the 4and ¢ buttons to adjust. (On the top panel, press BASS/TREBLE to select either bass or treble, then use the 1/ 4and Á/ ¢buttons to adjust.)

6To skip to a different track:

•Press 4once to skip to the start of the current track. Further presses skip to previous tracks.

•Press ¢to skip to the next track. Further presses take you to subsequent tracks.

•Use the number buttons (remote only) to jump straight to that track number. For track 10 use the 10/0 button; for tracks 11 and over, use the >10 button. For example, press >10, 6 for track 16; or >10, >10, 4 for track 24.

7For fast scanning:

•Press and hold 4(remote) or 1/ 4(top panel) for fast reverse scanning. Release to resume normal playback.

•Press and hold ¢(remote) or Á/ ¢(top panel) for fast forward scanning. Release to resume normal playback.

8To pause playback, press 6.

Press again to restart playback.

9To stop playback, press 7.

En