Pioneer VSX-D714, VSX-D514 manual Controls and displays Display

Controls and displays

Display

1 2 3 4 5 6 7 8 9 10

x
SP	A B

11 12	13	14	15	16
1 SIGNAL SELECT indicators	3	2 DIGITAL
Lights to indicate the type of input signal	When the STANDARD mode of the receiver is
assigned for the current component:	on, this lights to indicate decoding of a Dolby
AUTO	Digital signal.

04

English Italiano Français

Lights when AUTO signal select is on.

SB

Depending on the source, this lights when a signal with surround back channel encoding is detected.

DIGITAL

Lights when a digital audio signal is detected.

2DIGITAL

Lights when a Dolby Digital encoded signal is detected.

ANALOG

Lights when an analog signal is detected.

DTS

Lights when a source with DTS encoded audio signals is detected.

2

When the STANDARD mode of the receiver is on, this lights to indicate decoding of a DTS signal.

4 2 PRO LOGIC II (x)

When the (STANDARD) Pro Logic II mode of the receiver is on, this lights to indicate Pro Logic II decoding.

VSX-D714/D814 only – The x lights to indicate Pro Logic IIx decoding (see Listening in surround sound on page 36 for more on this).

5 VIR.SB

Lights during Virtual surround back processing.

6 DIRECT

Lights when source direct playback is in use. Direct playback bypasses the tone controls and channel levels for the most accurate reproduction of a source.

7 MIDNIGHT

Lights during Midnight listening.

8 SLEEP

Lights when the receiver is in sleep mode.

9 ATT

Lights when INPUT ATT is used to attenuate (reduce) the level of the analog input signal.

Deutsch Nederlands Español

31

En