04Controls and displays
SUBTITLE
Displays/changes the subtitles included in multilingual
SLEEP
Use to put the receiver in sleep mode and select the amount of time before the receiver turns off.
6(TUNE
7Component/Tuner control buttons
The main buttons ( , , etc.) are used to control a component after you have selected it using the MULTI CONTROL buttons. The tuner/DTV controls above these buttons can be accessed after you have selected the corresponding MULTI CONTROL button (TUNER or TV/SAT (when connected to DTV)).
RETURN
Returns to the last screen selected when using a digital TV tuner.
BAND DTV ON/OFF
Switches between the tuner AM and FM bands (page 56). Also switches a digital TV on/off.
DTV INFO
Use to bring up information screens on a digital TV.
DISPLAY
Use to switch the display between the station preset name and the frequency for the tuner.
34
CLASS
Switches between the three banks (classes) of radio station presets (page 57).
MPX
Switches between stereo and mono reception of FM broadcasts. If the signal is weak then switching to mono will improve the sound quality (page 56).
D.ACCESS
After pressing, you can access a radio station directly using the number buttons (page 56).
8 Number buttons
Use the number buttons to directly select a radio frequency (page 56) or the tracks on a CD, DVD, etc.
9 CHANNEL +/–
Use to select channels when using a VCR, DVR, etc.
10 INPUT SELECT
Use to select the input source.
11 LED
This lights when a command is sent from the remote control.
12 SOURCE
Press to turn on/off other components connected to the receiver.
13 DISC (ENTER)
The button’s use depends on the component selected. It can be used to enter commands for TV or DTV, and can also be used to select a disc in a
14 TV CONTROL buttons
These buttons are dedicated to control the TV assigned to the TV CONT button. Thus if you only have one TV to hook up to this system assign it to the TV CONT MULTI CONTROL button. If you have two TVs, assign the main TV to the TV CONT button.
En