Pioneer VSX-D514, VSX-D714 manual Speaker setting, Surround back speaker setting, Fs-Cs-Ss Fl-C -S

06Setting up the receiver

5Repeat steps 3 and 4 to adjust other setup options.

6When you’re done, press ENTER to exit.

•The setting display is automatically exited after 3 minutes of inactivity.

Speaker setting

•VSX-D514default setting: S (all speakers)

•VSX-D714/D814default setting: FL-CS-SS(If a subwoofer is detected when you turn the receiver on, the default is FS-CS-SS.)

You must let the receiver know how many speakers you have, and how big they are. The size you choose (large or small) determines how much bass is sent from the receiver to the speakers.

In the display, F, C, and S refer to front, center, and surround speakers respectively. Speaker size is denoted as L for large speakers, S for small speakers, and (asterisk) if no speaker is connected.

•If the cone size (diameter) of the speaker is larger than 15 cm, set the speaker size to L.

•If you’re not using a subwoofer, we recommend setting the front speakers to L.

•Cycle through the available choices

using or and choose a configuration that matches your speaker setup.

46

One of the following configurations should match your setup:

FS-CS-SS

FL-C -S	FS-CS-S
FL-C -SS	FS-C -SS
FL-C -SL	FS-C -S
FL-CS-S	FL-CL-SL
FL-CS-SS	FL-CL-SS
FL-CS-SL	FL-CL-S

Surround back speaker setting

VSX-D714/D814 only

•Default setting: S (VSX-D814), (VSX- D714)

You must let the receiver know if surround back speaker(s) have been connected, and how big they are. The size you choose (large or small) determines how much bass is sent from the receiver to the speakers. If you have connected a subwoofer to the surround back terminals (VSX-D814 only), you should select the surround back subwoofer setting (SB SW) from the options. Choose (asterisk) if no speaker is connected.

• Use or to select SB S, SB , SB SW or SB L.

		SB S		SB
	SB L		SB SW*
* VSX-D814 only

En