Numark Industries DXM09 Front Panel Features, Audio Channel Selection, Input Selector Selects

Page 4

FRONT PANEL FEATURES

1.Crossfader: This replaceable crossfader fades between channels assigned to CFA and CFB. The fader can be replaced by a Numark “D-Type” or “CP-Pro” fader. Call Numark customer service for information.

2.EQ Kills: Eliminates High, Mid, or Low frequencies for a unique effect. Each set of three switches will only affect audio routed through the crossfader.

3.3 Audio Channels: The mixer contains three audio channels which are described in detail in the Audio Channel section in this manual.

4.Headphone Monitoring: This section contains the CUE GAIN knob to adjust the headphone volume, and the CUE BLEND knob to mix between the master and the channels selected by the PFL buttons on each channel. Pressing the CUE BLEND button activates a split cue mode.

Push the knob to engage a split cuing mode which sends all audio channels with the CUE Assign button engaged to the left side of the headphones and the MASTER output to the right side of the headphones. This mode is an excellent way to mix when booth monitoring is not available.

5.Microphone Adjustments: The MIC GAIN knob controls the level of the microphone input on the front panel. There are also a MIC BASS knob and a MIC TREBLE knob to control the sound of the microphone input.

To turn the microphone on, move the MIC switch to the ON position.

6.Output Levels: The master level output is controlled by the MASTER knob. The booth output level is controlled by the BOOTH knob.

7.Beat Synced Effects: The mixer has a highly customizable beat-synced effect system which is described in further detail in the Effects Section in this manual.

8.Microphone Input: This 1/4" input is for the microphone controlled by the Microphone Adjustments (#5).

9.Headphone Output: Connect your headphones to this 1/4” output.

10.Crossfader Slope Adjustment: This knob adjusts the slope of the crossfader from a smooth fade (mixing) to a sharp cut (scratching).

11.Cue Tone: This knob adjusts the tone of the headphone output without affecting any other output. This can be used to help mix while in a loud environment.

12.Cross Fader Start: Both sides of the crossfader have a FADER START switch which can be used to trigger external devices which have a fader start input.

AUDIO CHANNEL SELECTION

1. Input Selector: Selects the

desired input source.

2.GAIN Knob: Adjusts the channel audio level pre-fader

and pre-EQ.

3. EQ Knobs: Adjusts the treble, mid and bass frequencies. The level of each frequency can be set all the way down to zero (killed).

4.PFL Cue: Sends the pre- fader level of the audio to

the cue section for headphone monitoring.

5.Crossfader Assign: Routes

the audio in the channel to one side of the crossfader. The OFF position bypasses the crossfader.

6.Channel Line Fader: Controls the level of the output signal post EQ into

the crossfader (if assigned) or MASTER.

4

Image 4
Contents Mixer Power Supply Mezclador Fuente DE AlimentaciónMischpult Stromkabel Mixer Bloc D’ALIMENTATIONMixer Quick Setup Guide English Read Safety Instruction Booklet Before Using the ProductRear Panel Connections Front Panel Features Audio Channel SelectionInput Selector Selects Crossfader Assign RoutesTo Properly Adjust Each Audio Channel Effect DiagramEffects Description Guía DE Instalación Rápida DEL Mezclador Español Conexiones DEL Panel Trasero Características DEL Panel Frontal Selección DEL Canal DE AudioAsignación del crossfader Dirige el Fader de línea deDiagrama DE Efectos Para ajustar correctamente cada canal de audioDescripción DE LOS Efectos Aufbauanleitung Deutsch Anschlüsse DER Rückseite Bedienelemente DES Front Panels Elemente DES AudiokanalsEingangswahl Schaltet Crossfader ZuweisungRichtiges Einpegeln eines Audiokanals DIE EffektsektionBeschreibung DER Effekte Guide Dinstallation Rapide Français Connexions Arrière Caractéristiques DU Panneau Avant Sélection DU Canal Audio Pour effectuer correctement le réglage de chaque canalSchéma DES Effets Description DES Effets Guida D’IMPOSTAZIONE Rapida DEL Mixer Italiano Collegamenti Pannello Posteriore Selezione Canali Audio Caratteristiche Pannello AnterioreManopole EQ regolano le Schema Effetti Per regolare correttamente ciascun canale audioDescrizione Effetti DXM09 Specifications Audio Fidelity SpecificationsPower Gain