Revolabs 03-HDEXECEU, 03-HDEXEC4CN, 01-HDEXEC4 Using the Base Station Front Panel Display

Page 24

So for example, if you set the ‗Audio channels‘ range for the microphones to 1-8, in the Control Panel, then the Base Station will use the DSP channel name of ―Revo 1‖ to control mute for the microphone paired to channel 1 of the Base Station.

Note: Channel names are case sensitive and must be entered correctly to function properly.

Using the Base Station Front Panel Display

The Base Station has four or eight indicator LEDs (one for each channel) and pairing push buttons on the front panel. (See Section Pairing Wireless Microphones to Base) When the LED is flashing GREEN or RED, that channel is active and connected to a wireless microphone (GREEN is for live audio, RED is for muted). When the LED is OFF, the channel is inactive (the microphone is out of range or turned off).

The LCD and menu buttons are designed to provide the system installer the ability to access certain configuration settings directly from the front panel instead of having to use the Revolabs HD Control Panel software.

Navigation up

Navigation down

Return to Main Menu

Select Item

Backup one menu level

The user can choose to have the front panel display the current firmware, the current IP address and box name, or the MAC address of the Base Station during normal operation. During a firmware upload, the front panel will display the current progress of the firmware upload.

The following is a list of the configuration settings that can be changed using the front panel display controls.

1.Select High Definition or Max Density modes

2.Select the Transmit Power of the Base Station

3.Select Table Top Mute mode

-24 -

Image 24

Contents Revolabs Executive HD Page Contents Safety and General Information FCC Notice to UsersStandards to which Conformity is declared Introduction System ComponentsInstalling the Revolabs Executive HD Base Station Controls and Connections Configuring the Executive Hdtm Base Station Using Multiple Revolabs Executive Hdtm Systems TogetherRevolabs Executive HD Audio Connections Primary DIP#1 -off Secondary DIP#1 -on Wire BUS cable Using the Rear Panel Configuration DIP Switches Using the Revolabs HD Control Panel SoftwareRevolabs HD Gold Control Panel Configuration Settings File Record EventsSystem Scan Network System Set Telnet Password System Set IP ConfigurationSystem Set Box Name System Enable Gold Firmware Update FirmwareConfig External Control Processor Tools Express PairConfig Audio Mode Config RedundancyConfig Power Scaling Config Transmit PowerConfig Lock Front Panel Config Audio ZoneStatus Monitoring Monitor Microphone Battery Monitor Microphone TypeMonitor Microphone Version Using the Serial Control Processor RS-232 or IP Monitor DIP SwitchesUsing the Executive HD Base Station with a Control System Monitor VersionsSerial Command & Return Strings String TablePage Using the Executive HD Base Station with a DSP Channel # Examples ClearOne Converge & XAPBiamp Audia & Nexia MUTE4Polycom SoundStructure Using the Base Station Front Panel Display Using the HD Wearable Wireless Microphones Revolabs HD Microphones and HD Microphone AdaptersAdjusting the Volume on the Wearable Microphone Earpiece 360 º PickupPattern Acoustic Cover protects microphone element non-removable Using the HD XLR Microphone Wireless Adapter Using the HD Wireless Adapter for Countryman Microphone Pairing Wireless Microphones to Base Station Revolabs Executive HD Charger Base Power Module Updating the Revolabs Hdtm FirmwareCharging the Microphone Batteries Updating the Executive HD Base Station & MicrophonesPage Revolabs Executive HD Indicator LEDs GreenWarranty Specifications Dimensions, L, W, H and WeightMaximum Audio Channels Power Cord Receptacle LED indicatorIndex Charger Bays