Revolabs 03-HDEXECEU, 03-HDEXEC4CN, 03-HDEXEC4EU 03-HDEXECCN, 01-HDEXEC4

Page 34

1.Go to www.Revolabs.com/downloads, download the latest firmware file and save it to your PC. The firmware file must remain in its .zip format in order to function correctly.

2.Connect the Charger Base to your computer using the Mini-USB cable provided. Make sure that the charger is plugged in and powered on and that the microphones are in it.

3.Connect to the Base Station using an Ethernet cable. This can be done via a direct connection to the PC or through a DHCP router or switch.

4.Set your PC IP address. The PC and Base station must be both set to a fixed IP address or both connected to a DHCP router and have DHCP turned on. (See Using the Revolabs HD Control Panel Software)

5.Start the Revolabs HD Control Panel software.

6.Select ‗Scan Network‘ from the ‗System‘ menu.

7.Select the Base Station you which to update and click ‗OK‘

8.Select ‗Update Firmware‘ from the ‗Firmware‘ menu.

9.Browse to the firmware file on your PC and click ‗OK‘

10.Select the Base Station that you would like to update.

11.Choose whether you would like to update the base, mics, or both.

12.Select OK and watch the firmware process either on the Base Station front panel display or in the ‗monitor‘ tab in the Revolabs HD Control Panel program. The HD Control Panel will notify you when the process is complete.

Note: A Base Station must either be connected to a DHCP server or have a fixed IP address in order to receive a firmware update. A Base Station that is set to DHCP with no DHCP server present will fail in any update attempt.

- 34 -

Image 34
Contents Revolabs Executive HD Page Contents Safety and General Information FCC Notice to UsersStandards to which Conformity is declared Introduction System ComponentsInstalling the Revolabs Executive HD Base Station Controls and Connections Using Multiple Revolabs Executive Hdtm Systems Together Configuring the Executive Hdtm Base StationRevolabs Executive HD Audio Connections Primary DIP#1 -off Secondary DIP#1 -on Wire BUS cable Using the Revolabs HD Control Panel Software Using the Rear Panel Configuration DIP SwitchesRevolabs HD Gold Control Panel File Record Events Configuration SettingsSystem Scan Network System Set IP Configuration System Set Telnet PasswordSystem Set Box Name Config External Control Processor System Enable GoldFirmware Update Firmware Tools Express PairConfig Power Scaling Config Audio ModeConfig Redundancy Config Transmit PowerConfig Audio Zone Config Lock Front PanelStatus Monitoring Monitor Microphone Type Monitor Microphone BatteryMonitor Microphone Version Using the Executive HD Base Station with a Control System Using the Serial Control Processor RS-232 or IPMonitor DIP Switches Monitor VersionsSerial Command & Return Strings String TablePage Examples Using the Executive HD Base Station with a DSPChannel # ClearOne Converge & XAPBiamp Audia & Nexia MUTE4Polycom SoundStructure Using the Base Station Front Panel Display Using the HD Wearable Wireless Microphones Revolabs HD Microphones and HD Microphone AdaptersAdjusting the Volume on the Wearable Microphone Earpiece Pickup 360 ºPattern Acoustic Cover protects microphone element non-removable Using the HD XLR Microphone Wireless Adapter Using the HD Wireless Adapter for Countryman Microphone Pairing Wireless Microphones to Base Station Revolabs Executive HD Charger Base Charging the Microphone Batteries Power ModuleUpdating the Revolabs Hdtm Firmware Updating the Executive HD Base Station & MicrophonesPage Revolabs Executive HD Indicator LEDs GreenWarranty Specifications Dimensions, L, W, H and WeightMaximum Audio Channels Index Power Cord ReceptacleLED indicator Charger Bays