Revolabs 03-HDEXEC4EU 03-HDEXECCN, 03-HDEXECEU System Enable Gold, Firmware Update Firmware

Page 14

Note: Changes to the IP Configuration will take place once the Base Station‟s power is cycled.

System – Enable Gold:

Each Executive HD Base Station has two sets of features. There are the standard features that are included with the system and the Gold features that require a 16 digit unlock code to enable the addition Gold features. You can use the unlock code to enable the Gold features by select ‗Enable Gold‘ from the ‗System‘ menu.

Note: An unlock code can be requested by providing the system MAC address shown on the front LED panel and the necessary purchase information through www.revolabs.com/downloads

Firmware - Update Firmware:

Executive HD Systems are field upgradable for the firmware portion of the Base Station and Microphones. The firmware must be sent to both the Base station and Microphones using the HD Control Panel program. (See Updating the Revolabs HD Firmware for more information)

Tools – Express Pair:

The ―Express Pair‖ tool allows all of the HD microphones, in an Executive HD System, to be paired simultaneously via the HD Control Panel. Selecting ―Express Pair‖, while connected to an Executive HD Base Station via Ethernet, and an Executive HD Charger Base via USB, will pair the microphones in the connected Charger Base to the selected Base Station. A notification will appear at the end of the process to confirm pairing success.

Note: A 4-channel Charger must be used with a 4-channel Base Station and an 8-channel Charger must be used with an 8-channel Base Station for an express pair to be successful.

Tools – Mic Pop-Ups:*

The user can choose to have Pop-Up notifications inform them of when a microphone is out of range.

Config - External Control Processor:

The Serial Control Processor allows the use of third party control system or DSP to monitor and/or control the Executive HD Base Station and Microphones. (See Using the Serial Control Processor)

- 14 -

Image 14
Contents Revolabs Executive HD Page Contents Safety and General Information FCC Notice to UsersStandards to which Conformity is declared Introduction System ComponentsInstalling the Revolabs Executive HD Base Station Controls and Connections Revolabs Executive HD Audio Connections Configuring the Executive Hdtm Base StationUsing Multiple Revolabs Executive Hdtm Systems Together Primary DIP#1 -off Secondary DIP#1 -on Wire BUS cable Revolabs HD Gold Control Panel Using the Rear Panel Configuration DIP SwitchesUsing the Revolabs HD Control Panel Software System Scan Network Configuration SettingsFile Record Events System Set Box Name System Set Telnet PasswordSystem Set IP Configuration Config External Control Processor System Enable GoldFirmware Update Firmware Tools Express PairConfig Power Scaling Config Audio ModeConfig Redundancy Config Transmit PowerStatus Monitoring Config Lock Front PanelConfig Audio Zone Monitor Microphone Version Monitor Microphone BatteryMonitor Microphone Type Using the Executive HD Base Station with a Control System Using the Serial Control Processor RS-232 or IPMonitor DIP Switches Monitor VersionsSerial Command & Return Strings String TablePage Examples Using the Executive HD Base Station with a DSPChannel # ClearOne Converge & XAPBiamp Audia & Nexia MUTE4Polycom SoundStructure Using the Base Station Front Panel Display Using the HD Wearable Wireless Microphones Revolabs HD Microphones and HD Microphone AdaptersAdjusting the Volume on the Wearable Microphone Earpiece Pattern 360 ºPickup Acoustic Cover protects microphone element non-removable Using the HD XLR Microphone Wireless Adapter Using the HD Wireless Adapter for Countryman Microphone Pairing Wireless Microphones to Base Station Revolabs Executive HD Charger Base Charging the Microphone Batteries Power ModuleUpdating the Revolabs Hdtm Firmware Updating the Executive HD Base Station & MicrophonesPage Revolabs Executive HD Indicator LEDs GreenWarranty Specifications Dimensions, L, W, H and WeightMaximum Audio Channels Index Power Cord ReceptacleLED indicator Charger Bays