Revolabs 03-HDEXEC4CN, 03-HDEXECEU, 01-HDEXEC4 Revolabs HD Microphones and HD Microphone Adapters

Page 25

4.Change the Low Pass Filter

5.Select DHCP or Fixed IP modes

6.Select Redundancy Mode

7.Select Power Scaling Mode

8.Select Mute Group

Note: Switching between High Definition, Max Density, and Redundancy modes will cause the Base Station to automatically reboot. A change in the IP configuration will require a power cycle to take effect.

Revolabs HD Microphones and HD Microphone Adapters

Use any of five microphones with your Revolabs HD ™ System:

Revolabs HD Wearable Wireless Microphone

Revolabs HD Omni-directional Tabletop Wireless Boundary Microphone

Revolabs HD Uni-directional Tabletop Wireless Boundary Microphone

Revolabs HD Universal Wireless Adapter for Handheld Microphones

Revolabs HD Wireless Adapter for Countryman Microphones

Using the HD Wearable Wireless Microphones

The Revolabs HD Wearable Microphones, shown in the following figure, are paired to the Base Station and can be worn on the user‘s shirt pocket, lapel or on a lanyard. They provide high quality full duplex audio between each user and the conferencing or audio system.

6

5

1

2

4

 

3

1.Earpiece jack — accepts the 2.5mm plug for the earpiece.

2.Charging port — docks to Revolabs HD Charger Bases.

3.Pocket clip — also used to attach microphone to a lapel, blouse or lanyard.

4.Mute Button — press to mute, un-mute and pair microphone.

5.Acoustic Cover — protects delicate microphone element (non-removable).

6.LED display — visual status for mute, un-mute, and pairing.

Note: Microphones in new systems must be paired to the Base Station with each microphone assigned to a unique channel on the base unit. See pairing instructions below.

- 25 -

Image 25
Contents Revolabs Executive HD Page Contents FCC Notice to Users Safety and General InformationStandards to which Conformity is declared System Components IntroductionInstalling the Revolabs Executive HD Base Station Controls and Connections Using Multiple Revolabs Executive Hdtm Systems Together Configuring the Executive Hdtm Base StationRevolabs Executive HD Audio Connections Primary DIP#1 -off Secondary DIP#1 -on Wire BUS cable Using the Revolabs HD Control Panel Software Using the Rear Panel Configuration DIP SwitchesRevolabs HD Gold Control Panel File Record Events Configuration SettingsSystem Scan Network System Set IP Configuration System Set Telnet PasswordSystem Set Box Name Firmware Update Firmware System Enable GoldConfig External Control Processor Tools Express PairConfig Redundancy Config Audio ModeConfig Power Scaling Config Transmit PowerConfig Audio Zone Config Lock Front PanelStatus Monitoring Monitor Microphone Type Monitor Microphone BatteryMonitor Microphone Version Monitor DIP Switches Using the Serial Control Processor RS-232 or IPUsing the Executive HD Base Station with a Control System Monitor VersionsString Table Serial Command & Return StringsPage Channel # Using the Executive HD Base Station with a DSPExamples ClearOne Converge & XAPMUTE4 Biamp Audia & NexiaPolycom SoundStructure Using the Base Station Front Panel Display Revolabs HD Microphones and HD Microphone Adapters Using the HD Wearable Wireless MicrophonesAdjusting the Volume on the Wearable Microphone Earpiece Pickup 360 ºPattern Acoustic Cover protects microphone element non-removable Using the HD XLR Microphone Wireless Adapter Using the HD Wireless Adapter for Countryman Microphone Pairing Wireless Microphones to Base Station Revolabs Executive HD Charger Base Updating the Revolabs Hdtm Firmware Power ModuleCharging the Microphone Batteries Updating the Executive HD Base Station & MicrophonesPage Green Revolabs Executive HD Indicator LEDsWarranty Dimensions, L, W, H and Weight SpecificationsMaximum Audio Channels LED indicator Power Cord ReceptacleIndex Charger Bays