Using SET MENU
The flow chart of SET MENU
The following diagram illustrates the overall flow of the setup procedure.
Run LANGUAGE SETUP.
See “Changing OSD language” on page 30.
Run AUTO SETUP (IntelliBeam).
See “AUTO SETUP (IntelliBeam)” on page 31.
If an error occurs
Look for a remedy.
See “Error messages for AUTO SETUP” on page 37 for a complete list of error messages and possible remedies.
Play back audio signals or adjust the settings for the beam mode.
See “Playback” on page 41, “Enjoying surround sound” on page 44.
If you want to make additional settings and adjustments
Run MANUAL SETUP.
See “MANUAL SETUP” on page 56.
y
•If you cannot clearly hear a sound beam from a specific channel, adjust settings for SETTING PARAMETERS (see page 58) or for BEAM ADJUSTMENT (see page 59) in
BEAM MENU.
•If there are acoustically absorbent objects such as curtains in the path of the sound beams, adjust settings for TREBLE GAIN in BEAM MENU (see page 61).
SETUP
English