Yamaha HTY-750 owner manual 2BEAM Menu, 58 En, Setting parameters

Page 60

MANUAL SETUP

BEAM MENU

Use to manually adjust the various parameters related to the sound beam output.

SET MENU → MANUAL SETUP → BEAM MENU

2)BEAM MENU

. A)SETTING PARAMETERS B)BEAM ADJUSTMENT C)IMAGE LOCATION

[p]/[p]:Up/Down [ENTER]:Enter

y

You can adjust the sound beam output level of each channel in “Adjusting the audio balance” (see page 67).

■SETTING PARAMETERS

(Setting parameters)

FLAT TO WALL		ANGLE TO WALL
FLAT TO WALL		OR CORNER

•Select FLAT TO WALL if this unit is installed in parallel with the wall in your listening room. Adjust the width and length of your listening room as well as the distance of the listening position from this unit and the distance of the center of this unit from the left wall.

Listening position from the left wall

Use to set the position of this unit in your listening room and the distance of this unit from the listening position. When you make settings for each parameter, other related parameters are automatically adjusted to best match your listening environment.

Room length

Listening position from the unit

Note

If you make adjustments in SETTING PARAMETERS, the beam optimization settings made in the AUTO SETUP procedure will be lost. If you want to keep the beam optimization settings made in the AUTO SETUP and make further adjustments, adjust settings in BEAM ADJUSTMENT first (see page 59).

A)SETTING PARAMETERS 1/3

. INSTALLED POSITION

;;;;;;;FLAT TO WALL

[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return

INSTALLED POSITION (Installed position of this unit)

Use to adjust the installed position of this unit.

Room width

Choices for the room width and length:

2.0 m to 12.0 m (6.5 ft to 40.0 ft)

Choices for the listening position from this unit: 1.8 m to 9.0 m (6.0 ft to 30.0 ft)

Choices for the listening position from the left wall: 0.6 m to 11.4 m (2.0 ft to 38.0 ft)

	A)SETTING PARAMETERS 2/3

Room width and
Room width and		-------[ 5.4m ]-
length
length		4.9m
		4.9m

	[p]/[p]:Up/Down [p]/[p]:Sel
		[ENTER]:Return

Choices: FLAT TO WALL (Parallel to wall installation),

ANGLE TO WALL OR CORNER (Corner installation)

Listening position from the unit and the left wall

A)SETTING PARAMETERS 3/3

--------

2.7m [ 2.5m ]

[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return

58 En

Image 60

Contents HTY-750 For U.K. Customers Contents Overview Features Features Using this manual Supplied accessories Remote control ⋅1Cable clamp ⋅1 Controls and functions Front panelInput STANDBY/ONFront panel display Rear panel Remote control 10 En11 En 12 En Numeric buttonsInstallation Before installing this unitInstalling this unit 13 EnInstallation examples 14 EnExample Using a rack 15 EnThis unit Connections 16 EnFor audio input For audio output For video output17 En Cables used for connections AudioAffixing cables Connecting a TV 18 EnAudio OSD video pin cable Audio pin cable Optical cableConnecting a DVD player/recorder Video signal to the TV19 En Audio pin cable Digital audio pin cableConnecting a digital satellite tuner or a cable TV tuner 20 EnAudio pin cable Optical cable Digital satellite tuner Or cable TV tunerConnecting a digital airwave tuner 21 EnConnect to the analog audio output jacks on the TV Digital airwave tunerConnecting a VCR 22 EnConnecting other external components 23 EnOptical Digital output Connecting a subwoofer Monaural System input connector Subwoofer24 En Connecting the AC power supply cable 25 EnTo the AC wall outlet Installing batteries in the remote control Operation range of the remote controlClose the battery cover Getting startedPress STANDBY/ON again to set this unit to the standby mode Press STANDBY/ON to turn on the power of this unit27 En Using SET Menu Displaying the OSD on-screen display28 En Flow chart of SET Menu 29 EnLanguage Setup Changing OSD languageSET Menu 30 EnAuto Setup IntelliBeam Flow chart of Auto Setup31 En Beam optimization Sound optimizationInstalling the IntelliBeam microphone Press STANDBY/ON to turn off the power of this unit32 En Using Auto Setup IntelliBeam 33 EnAssembling the supplied cardboard Microphone stand Center lineAuto Setup Set the operation mode selector to YSPPress / to select Auto Setup and press Enter 34 EnAuto Setup Start 35 EnBEAM+SOUND Optimz Show Result 36 EnCheck that the following screen is displayed on your TV ExampleError messages for Auto Setup Before the Auto Setup procedure startsWhile the Auto Setup procedure is in progress 37 EnUsing the system memory Saving settings2MEMORY Save MemoryLoading settings Memory2MEMORY Save 39 En1MEMORY Load 40 EnPress / to select Load and press Press Enter again Press / to select MEMORY1Playback Selecting the input sourceD V D X X X a U T O 41 EnPlaying back sources C RA U X X X X a U T O 42 EnAdjusting the volume D I O X M U T E X O N43 En Muting the soundEnjoying surround sound Beam44 En Press 5BEAM to select 5 BeamStereo plus 3 Beam My Surround45 En Decoder indicators 46 EnSurround modes and recommended sources SourceEnjoying 2-channel sources Surround sound47 En Press Volume +/- to adjust the volume level 48 EnSelect the TV channel you want to watch Press TVAdjusting surround mode parameters When Dolby Pro Logic II Music is selectedWhen DTS Neo6 Music is selected 49 EnPress Stereo to select the stereo playback as the beam mode Enjoying stereo soundT E R E O X M O D E 50 EnUsing auto-adjust function Playing back sound clearly My Beam51 En Press and hold MY Beam for more than two secondsUsing manual-adjust function G L E52 En 53 En NIGHTCINEMA, NIGHTMUSIC, TV EqualUsing the sleep timer Unit to confirm the setting for the sleep timer54 En Flashes Lights upCanceling the sleep timer L E E P X X O F F55 En Disappears56 En Sound MenuBeam Menu Input MenuManual Setup Using Manual Setup57 En Setting parameters Installed Position Installed position of this unit2BEAM Menu 58 EnBeam Adjustment Beam adjustment 59 EnHorizontal Angle Horizontal angle Listening position from the unit Room width60 En Beam Travel Length Beam travel lengthFocal Length Focal length Front left channelCimage Location 61 EnImage Location Image location 1SOUND Menu Atone ControlCmute Level 62 EnDaudio Delay Audio Delay Audio delay63 En TruBassAinput Mode 3INPUT MenuBinput Trim 64 EnCinput Rename 65 EnInput Rename Input rename Press / to select the desired character4DISPLAY Menu AF.DISPLAY SETBosd SET Cunit SETAdjusting the audio balance Using the test toneS T X L E F T 67 EnUsing the audio output being played back 68 En69 En Selecting the input mode 70 EnAuto DTSAdjusting the system parameters Using the system parametersM O R Y X P R O T E C T 71 EnPress / to switch between Protect on and Protect OFF 72 EnSetting the MAX Volume Setting the Turn on VolumePress / to adjust the maximum volume level X X V O L U M E X S E TSetting the Demo Mode Press / to adjust the initial volume levelR N X O N X V O L U M E M O X M O D EPress / to switch between Demo on Demo OFF 75 EnPress / to switch between P.INPUT on P.INPUT OFF Disabling the front panel keys76 En Setting the Factory Preset Press / to switch between F.PANEL on and F.PANEL OFFC T O R Y X P R E S E T 77 EnPress / to switch between Preset Reset and Preset Cancel 78 EnRemote control features Setting remote control codes79 En Code SETControlling other components 80 EnOperating your TV TV INPUT1/281 En Operating your DVD player/recorderOperating your STB CATV/Satellite tuner Operation buttons for DVD players82 En Operating your VCROperation buttons for VCR Using the TV macro Setting macros for the TV with the tuning capabilityPress Enter to confirm the macro setting 83 EnSetting macros for the TV without the tuning capability Canceling the macros84 En Operating macrosTroubleshooting 85 EnGeneral 86 En Remote control 87 EnGlossary 88 En89 En LFE 0.1-channelPCM Linear PCM SRS TruBassIndex 90 EnNumerics Specifications 91 En92 En ConditionsList of remote control codes VCRDVD Player Cable TV TunerSatellite Tuner 834Install this unit in the 4 Installation is completed Items used for connections and operations This guidePlace this unit in front Connect this unit Rack To your TV and DVD playerAbout the IntelliBeam microphone About the room environment