Remote control features
■Setting macros for the TV without the tuning capability
1Press and hold CODE SET and press one of the input selector buttons to select the input source you want to set macros for.
Proceed to step 2 while holding down CODE SET.
■Operating macros
Press and hold one of the input selector buttons for approximately two seconds to select the input source you want to operate macros for.
The TV input changes at the same time the input mode changes.
TV MUTE
While holding
down, press
CODE SET
STB | VCR | DVD | AUX |
STB | VCR | DVD | AUX |
2Press MACRO while holding down CODE SET.
TV MUTE | While holding MACRO |
| down, press |
CODE SET |
|
3Press INPUT1.
Check that the TV screen changes to the input 1 screen.
INPUT1
4Press TV INPUT repeatedly until the screen changes to the display of the input source selected in step 1.
TV INPUT
5Press ENTER to confirm the setting.
ENTER
■Canceling the macros
1Press and hold CODE SET and press one of the input selector buttons to select the input source you want to cancel the macros for.
Proceed to step 2 while holding down CODE SET.
TV MUTE | While holding |
|
|
|
|
|
|
|
|
| |
| down, press | STB | VCR | DVD | AUX |
CODE SET |
|
|
|
|
|
2Press MACRO while holding down CODE SET.
TV MUTE | While holding MACRO |
| down, press |
CODE SET |
|
3Press ENTER to cancel the macros.
ENTER