■AUDIO DELAY (Audio delay)
Use to delay the sound output and synchronize it with the video image. This may be necessary when using certain LCD monitors or projectors.
Choices: 0 to 160 msec
D)AUDIO DELAY
AUDIO DELAY;;;;;0msec
[p]/[p]:Select [ENTER]:Return
■DD/DTS Dynamic Range
(Dynamic range of Dolby Digital and
DTS signals)
Use to select the amount of dynamic range compression. This setting is effective only when the unit is decoding Dolby Digital and DTS signals. Dynamic range is the difference between the smallest sound that can be heard above the noise of the equipment and the biggest sound that can be heard without distortion.
Choices: MIN (minimum), STD (standard), MAX (maximum)
E)DD/DTS Dynamic Range
MIN STD | pMAX |
[p]/[p]:Select [ENTER]:Return
Select to adjust the dynamic range compression.
•Select MIN for listening to sources at low volume levels.
•Select STD for general use.
•Select MAX for feature films.
MANUAL SETUP
■TruBass
Use to turn on or off the bass sound enhancer. The SRS TruBass technology improves bass even without a subwoofer and provides deeper, richer bass in the presence of a subwoofer.
Choices: OFF, ON
F)TruBass
OFF | pON |
[p]/[p]:Select [ENTER]:Return
Note
TruBass is not available when My Beam (see page 51) or My Surround (see page 45) is selected as the beam mode.
OPERATION | ADVANCED |
|
|
English