5Press 
/ 
to switch between “DEMO: ON”
and “DEMO: OFF”.
ENTER
X D E M O : X X O N
Adjusting the system parameters
Setting the PANEL INP. KEY
You can disable the INPUT on the front panel when you adjust the system parameters.
1Repeat steps 1 to 3 in “Using the system parameters” on page 71.
2Set the operation mode selector to YSP.
TV/AV
YSP
3Press 
/ 
so that “PANEL INP. KEY” is displayed in the front panel display.
X D E M O : X X O F F
•Select DEMO: ON to activate the demo mode.
•Select DEMO: OFF to deactivate the demo mode.
6Press STANDBY/ON on the remote control to set this unit to the standby mode.
STANDBY/ON
ENTER
P A N E L X I N P . X K E Y
The new setting will be activated when you turn on the power of this unit next time.
Press ENTER while playing back sources to test the sound beam.
The sound beam being output shuttles between left and right. Press ENTER again to stop shuttling.
4Press ENTER.
ENTER
OPERATION | ADVANCED |
English