Yamaha HTY-750 owner manual 56 En, Sound Menu, Beam Menu, Input Menu, Display Menu

MANUAL SETUP

To achieve the best quality surround sound, you can use MANUAL SETUP to fine-tune the listening environment parameters, as well as to make advanced settings for sound signals, sound beams, digital input, and the OSD. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your own listening environment.

y

•You can save the settings optimized by the AUTO SETUP procedure (see page 38). A set of settings optimized according to the specific conditions of your listening environment can be recalled later depending on the varying conditions of your listening environment (see page 39).

•Most of the parameters in SOUND MENU and BEAM MENU are automatically set when you run AUTO SETUP (see page 31). Use SOUND MENU and BEAM MENU to make additional adjustments.

•BEAM MENU allows you to make settings for the surround sound effects normally available in the speaker settings menu.

•Make settings for the parameters in BEAM MENU first before making settings for the parameters in SOUND MENU, INPUT MENU, and DISPLAY MENU.

SOUND MENU

Use to manually adjust the various parameters related to the sound output.

Item	Features	Page
TONE CONTROL	Adjusts the output level of high-frequency or low-frequency sound.	62
SUBWOOFER SET	Adjusts the various subwoofer settings.	62
MUTE LEVEL	Adjusts the muting level.	62
AUDIO DELAY	Adjusts the audio delay.	63
DD/DTS Dynamic Range	Adjusts the dynamic range of Dolby Digital or DTS signals.	63
TruBass	Selects the bass sound enhancer.	63

BEAM MENU

Use to manually adjust the various parameters related to the sound beam output.

Item	Features	Page
SETTING PARAMETERS	Adjusts the listening room and listening position settings.	58
BEAM ADJUSTMENT	Adjusts the various sound beam settings.	59
IMAGE LOCATION	Adjusts the sound position of the front left and right channels.	61

INPUT MENU

Use to manually adjust the various parameters related to the audio and video input.

Item		Features	Page
INPUT MODE	Selects the initial input of the source.		64
INPUT TRIM	Adjusts the input level of the source.		64
INPUT RENAME	Renames the displayed input source.		65

DISPLAY MENU

Use to manually adjust the various parameters related to the display.

Item	Features	Page
F.DISPLAY SET	Adjusts the front panel display settings.	66
OSD SET	Adjusts the OSD settings.	66
UNIT SET	Changes the display unit of measurement.	66

56 En