Setting the MAX VOLUME
You can set the maximum volume level so that this unit will not output sound beyond the limited volume level.
1Repeat steps 1 to 3 in “Using the system parameters” on page 71.
2Set the operation mode selector to YSP.
“
TV/AV
YSP
3Press / so that “MAX VOLUME SET” is displayed in the front panel display.
ENTER
Adjusting the system parameters
5Press / to adjust the maximum volume level.
ENTER
Control range: MAX, 99 to 01, MIN
Control step: 1
6Press STANDBY/ON on the remote control to set this unit to the standby mode.
STANDBY/ON
The new setting for the maximum volume level will be activated when you turn on the power of this unit next time.
Setting the TURN ON VOLUME
M A X X V O L U M E X S E T
4Press ENTER.
ENTER
You can set the initial volume level when the power of this unit is turned on.
1Repeat steps 1 to 3 in “Using the system parameters” on page 71.
2Set the operation mode selector to YSP.
TV/AV
YSP
OPERATION | ADVANCED |
English