Plantronics DJM-3000 operating instructions Effect MIX Controls

Page 11

PART NAMES AND FUNCTIONS

≠Effect beat selector switches (@, #)

Use this switch to change the value of Effect PARAMETER 1 control (‹) in accordance with the BPM of the source selected with the Effect CH. SELECT switch (¤). The setting value of this switch differs depending on the setting of the Effect selector switch (⁄).

When DELAY, ECHO, PAN, or TRANS are selected, the parameter 1 value for the BPM of the selected source can be set to 1/4 beat, 1/2 beat, 1/1 beat, 2/1 beat, 4/1 beat, or 8/1 beat.

When DELAY or ECHO are selected, values can be set to 1/4x, 1/2x, 1/1x, 2/1x, 4/1x or 8/1x, within a range such that the parameter 1 value does not exceed 3500 ms.

When FILTER or FLANGER are selected, the parameter 1 value for the BPM of the selected source can be set to 1/2 beat, 1 beat, 2 beats, 4 beats, 8 beats, 16 beats, or 32 beats.

When PITCH is selected, the value can be set to –100%, –50%, –33%, 0%, 33%, 50%, or 100%.

When REVERB is selected, the value can be set to 10%, 20%, 35%, 50%, 65%, 80%, or 90%.

This control is disabled when AUTO BPM or SND/RTN are selected.

ŸH.P CUE (Headphones cue switch)

When this switch is pressed it lights orange, and beat effects are output to the headphones. Pressing the switch again disconnects the beat effect to the headphones and turns off the switch lamp.

⁄Effect selector switch

Use to select desired effects (see page 12).

¤CH. SELECT (Effect channel selector switch)

Use to select the source you wish to apply effects to.

‹TIME (PARAMETER 1) (Effect parameter 1 control)

This control is used to set the time parameter for the

onboard effector (see page 14).

›LEVEL/DEPTH (PARAMETER 2) (Effect parameter 2 control)

This control is used to set quantitative parameters for the onboard effector (see page 14).

fiON/OFF, TAP (Effect ON/OFF switch, TAP switch) This switch produces different operations depending on the setting of the Effect selector switch (⁄)

When DELAY, ECHO, PAN, TRANS, FILTER, FLANGER, REVERB, PITCH, or SND/RTN are selected, the switch operates to turn the selected effect ON/OFF.

OFF: the orange lamp lights; ON: orange lamp flashes.

When AUTO BPM is selected the switch becomes a “TAP” switch; by tapping the switch together with the source beat, the BPM can be input manually.

When tapping the TAP switch to count the BPM, both BPM counter range displays (70-139 BPM and 91-180 BPM) go out, and the manual mode is enabled (see page 19).

ÅEFFECT MIX Controls

flFADER/OFF/AUTO (EFFECT MIX selector switch) Use to select the cross fader effect mode.

FADER: Selects Effect Mix Fader mode. When this is selected, the Cross fader lever (™) can be used to control effects and perform cue start and back cue.

OFF: Normal mode

AUTO: The Effect Mix Auto mode. When this is selected, the Effect select/start switches (‡, °, ·) can be used to control effects, perform cue

start and back cue.

‡, °, · Effect select/start switches

Use to select the type of Effect Mix desired (default is ECHO)

The switch for the selected function flashes.

‡ECHO switch

°ZIP switch · ROLL switch

11

<DRB1314>

Page 10 Page 12
Image 11
Page 10 Page 12
Contents DJM-3000 DRB1314 Important Notice Contents FeaturesChecking Accessories Condensation Installing the DJM-3000 in an EIA rackCleaning the Unit LocationConnection of Input Equipment Connecting audio cordsConnections Digital OUT Connection of Outputs, Microphones, etcMaster Level ATT REC OUTMIC 2 Level Part Names and FunctionsMIC 1 Level Master Master Controls Booth Monitor ControlPower Switch Headphones Controls \ Fader Start Switches CH-1, CH-2, CH-3, CH-4§ Auto BPM Counter « Beat Effects ControlsEffect MIX Controls Beat Effector Effects linked to BPM Using the Effect FunctionsFeatures of Various Effectors Pitch Pitch Shifter FilterFlanger ReverbPAN DelayItems Set for Each Effect EchoSet the parameter value Turn on the Effect ON/OFF switchPitch Effector SettingsSet the Effect selector switch to Pitch Operating Reverb and Pitch ShifterSet external effector parameters, etc Using an External EffectorTurn the Effect ON/OFF switch on Adjust the return levelBPM Counting Using the Auto Mode to Count BPMPress CH-1 H.P CUE switch Effect parameter/ displays BPM display Using the Manual Mode to Count BPMDJM-3000 Using the Fader Start FunctionCross Fader Start Play and Back Cue Play CMX-3000 CMX-5000 CDJ-1000 CDJ-100S CDJ-700S CDJ-500Starting with the Cross Fader PrecautionStarting with the Channel Fader Effect Mix Auto Mode Using the Effect MIX FunctionEffect Mix Features Effect Mix Fader ModeSelecting the Effect Mix Function Operate the Cross fader Lever Effect Mix Fader ModeSet the Cross Fader Curve selector switch to Set Effect MIX selector switch to FaderSet the Effect MIX selector switch to Auto Effect Mix Auto ModeProblem Possible Cause Countermeasure TroubleshootingElectrical Section, etc SpecificationsAccessories Audio SectionAllstate Parkway Markham, on L3R OP2 905 877 800 872Pioneer Electronics of Canada, Inc CA 90801-1760, U.S.A
Top Page Image Contents