Plantronics DJM-3000 operating instructions Operating Reverb and Pitch Shifter, Effector Settings

Page 16

USING THE EFFECT FUNCTIONS

Operating Reverb and Pitch Shifter

Effector Settings

Effect

Effect Parameter 1 (TIME)

Effect Parameter 2 (LEVEL/DEPTH)

 

 

 

REVERB

Reverb time (echo time)

Effect mix ratio

 

Setting range: 1 to 100%,

(Balance between original and reverb sound levels)

 

in 1% steps

 

 

 

 

PITCH

Pitch

Effect mix ratio

(Pitch Shifter)

Setting range: 0 to ±100%,

(Balance between original and pitch-shifted sound

 

in 1% steps

levels)

 

 

 

Example: Display when music on CH-3 has been pitch-shifted 90%.

BPM display

Effect parameter/BPM display

H.P CUE switch

Effect selector switch

Effect CH. SELECT switch

Effect PARAMETER 1 control (TIME)

Effect PARAMETER 2 control (LEVEL/DEPTH)

Effect ON/OFF switch

1 Set the Effect selector switch to PITCH.

Setting the Balance Between Original and Pitch-

 

Shifted Sound Levels

2Set the Effect CH. SELECT switch to 3.

÷ The Effect parameter/BPM display LED “3” will light. * The entire BPM display will turn off.

3Set the parameter value.

When the H.P CUE switch (in the BEAT EFFECTS controls) is pressed, the effect can be confirmed by listening to the headphones output.

Setting Pitch

÷Pressing # on the Effect beat selector switch will increase the pitch setting +33%, +50% or +100%, while pressing @ will decrease it –33%, –50% or –100%.

÷More precise pitch can be set with the Effect PARAMETER 1 control (TIME).

÷The balance between original and pitch-shifted sound levels is set using the Effect PARAMETER 2 control (LEVEL/DEPTH). Turning this control to the left will decrease pitch-shifted sound and turning it to the right will increase it.

16

<DRB1314>

Page 15 Page 17
Image 16
Page 15 Page 17
Contents DJM-3000 DRB1314 Important Notice Checking Accessories FeaturesContents Installing the DJM-3000 in an EIA rack Cleaning the UnitLocation CondensationConnections Connecting audio cordsConnection of Input Equipment Connection of Outputs, Microphones, etc Master Level ATTREC OUT Digital OUTMIC 1 Level Part Names and FunctionsMIC 2 Level Booth Monitor Control Power Switch Headphones Controls\ Fader Start Switches CH-1, CH-2, CH-3, CH-4 Master Master Controls« Beat Effects Controls § Auto BPM CounterEffect MIX Controls Features of Various Effectors Using the Effect FunctionsBeat Effector Effects linked to BPM Filter FlangerReverb Pitch Pitch ShifterDelay Items Set for Each EffectEcho PANTurn on the Effect ON/OFF switch Set the parameter valueEffector Settings Set the Effect selector switch to PitchOperating Reverb and Pitch Shifter PitchUsing an External Effector Turn the Effect ON/OFF switch onAdjust the return level Set external effector parameters, etcPress CH-1 H.P CUE switch Using the Auto Mode to Count BPMBPM Counting Using the Manual Mode to Count BPM Effect parameter/ displays BPM displayUsing the Fader Start Function Cross Fader Start Play and Back Cue PlayCMX-3000 CMX-5000 CDJ-1000 CDJ-100S CDJ-700S CDJ-500 DJM-3000Starting with the Channel Fader PrecautionStarting with the Cross Fader Using the Effect MIX Function Effect Mix FeaturesEffect Mix Fader Mode Effect Mix Auto ModeSelecting the Effect Mix Function Effect Mix Fader Mode Set the Cross Fader Curve selector switch toSet Effect MIX selector switch to Fader Operate the Cross fader LeverEffect Mix Auto Mode Set the Effect MIX selector switch to AutoTroubleshooting Problem Possible Cause CountermeasureSpecifications AccessoriesAudio Section Electrical Section, etc800 872 Pioneer Electronics of Canada, IncCA 90801-1760, U.S.A Allstate Parkway Markham, on L3R OP2 905 877
Top Page Image Contents