Plantronics DJM-3000 operating instructions Selecting the Effect Mix Function

Page 23

USING THE EFFECT MIX FUNCTION

Selecting the Effect Mix Function

Use the EFFECT MIX selector switch to select the desired operation mode.

OFF: Normal mode

No Effect Mix operation.

All three Effect select/start switches (ECHO, ZIP, ROLL) will remain unlighted.

The cross fader left-right Fader displays A and B will both be unlighted.

FADER: Effect Mix Fader Mode

The Cross fader lever can be used to manipulate effects, and to perform cue start/back cue.

Of the three Effect select/start switches (ECHO, ZIP, ROLL), the selected one will flash (default setting is ECHO), and the others will light steadily.

The cross fader left-right Fader displays A and B will light as follows:

Condition

Fader Display A

Fader Display B

 

 

 

When Cross fader lever is at A side

LIGHTS

OFF

When Cross fader lever is at B side

OFF

LIGHTS

When mode is entered with Cross fader lever at midway point

LIGHTS

LIGHTS

When Cross fader lever is moved from A side to midway point

FLASHES

OFF

after mode is entered.

 

 

When Cross fader lever is moved from B side to midway point

OFF

FLASHES

after mode is entered.

 

 

 

 

 

AUTO: Effect Mix Auto Mode

The three Effect select/start switches (ECHO, ZIP, ROLL) can be used to manipulate effects and to perform cue start/back cue (Cross fader lever does not operate).

Of the three Effect select/start switches (ECHO, ZIP, ROLL), the selected one will flash, and the others will light steadily.

The cross fader left-right Fader displays A and B will light as follows:

Condition

Fader Display A

Fader Display B

 

 

 

When mode is entered with Cross fader lever at A side

LIGHTS

OFF

When mode is entered with Cross fader lever at B side

OFF

LIGHTS

When mode is entered with Cross fader lever at midway point

LIGHTS

LIGHTS

When sound from A side is output

LIGHTS

OFF

When effects are applied to A side

FLASHES

OFF

When sound from B side is output

OFF

LIGHTS

When effects are applied to B side

OFF

FLASHES

 

 

 

The effect mix mode does not operate when Assign A and Assign B are set to the same channel.

(In this case, fader display A, fader display B, and the fader start display for the selected channel will all flash).

FADER START switches

EFFECT MIX selector switch

Fader display A

 

Fader display B

 

CROSS FADER ASSIGN

Cross fader lever

CROSS FADER ASSIGN

Effect select/

 

B switch

start switches

A switch

 

 

 

 

23

<DRB1314>

Image 23
Contents DJM-3000 DRB1314 Important Notice Contents FeaturesChecking Accessories Condensation Installing the DJM-3000 in an EIA rackCleaning the Unit LocationConnection of Input Equipment Connecting audio cordsConnections Digital OUT Connection of Outputs, Microphones, etcMaster Level ATT REC OUTMIC 2 Level Part Names and FunctionsMIC 1 Level Master Master Controls Booth Monitor ControlPower Switch Headphones Controls \ Fader Start Switches CH-1, CH-2, CH-3, CH-4§ Auto BPM Counter « Beat Effects ControlsEffect MIX Controls Beat Effector Effects linked to BPM Using the Effect FunctionsFeatures of Various Effectors Pitch Pitch Shifter FilterFlanger ReverbPAN DelayItems Set for Each Effect EchoSet the parameter value Turn on the Effect ON/OFF switchPitch Effector SettingsSet the Effect selector switch to Pitch Operating Reverb and Pitch ShifterSet external effector parameters, etc Using an External EffectorTurn the Effect ON/OFF switch on Adjust the return levelBPM Counting Using the Auto Mode to Count BPMPress CH-1 H.P CUE switch Effect parameter/ displays BPM display Using the Manual Mode to Count BPMDJM-3000 Using the Fader Start FunctionCross Fader Start Play and Back Cue Play CMX-3000 CMX-5000 CDJ-1000 CDJ-100S CDJ-700S CDJ-500Starting with the Cross Fader PrecautionStarting with the Channel Fader Effect Mix Auto Mode Using the Effect MIX FunctionEffect Mix Features Effect Mix Fader ModeSelecting the Effect Mix Function Operate the Cross fader Lever Effect Mix Fader ModeSet the Cross Fader Curve selector switch to Set Effect MIX selector switch to FaderSet the Effect MIX selector switch to Auto Effect Mix Auto ModeProblem Possible Cause Countermeasure TroubleshootingElectrical Section, etc SpecificationsAccessories Audio SectionAllstate Parkway Markham, on L3R OP2 905 877 800 872Pioneer Electronics of Canada, Inc CA 90801-1760, U.S.A