Plantronics DJM-3000 BPM Counting, Using the Auto Mode to Count BPM, Press CH-1 H.P CUE switch

Page 18

BPM COUNTING

Using the Auto Mode to Count BPM

This mode counts and displays the BPM of the channel selected with the H.P CUE switch and (when Effect selector switch is set to AUTO BPM, the CH-1 to CH-4 H.P CUE switch becomes the AUTO BPM COUNTER’s channel select switch) the channel selected with the Effect CH. SELECT switch, thus making it easy to synchronize two tracks with different speeds (count range 70.0-180.0 BPM).

Example: Display of BPM for CH-1 selected with H.P CUE switch and CH-2(2) selected with Effect CH. SELECT switch:

BPM display

 

Effect selector switch

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Effect CH.

SELECT switch

Effect

PARAMETER 1

control (TIME)

CH-1 H.P CUE switch

Effect parameter/

TAP switch

 

BPM display

 

1Set the Effect selector switch to AUTO BPM.

2Press the BPM counter range selector switch to choose the desired BPM count range.

÷Select from one of the three ranges: 70-139, 91-180, or 70-180. The 70-180 range is selected with both LEDs (70-139 BPM and 91-180 BPM) light.

3Set the Effect CH. SELECT switch to 2.

÷The Effect parameter/BPM display LED “2” will light.

÷The BPM of the music input to CH-2 will appear on the

Effect parameter/BPM display’s counter.

*If the BPM cannot be counted for 2 seconds or more, the counter will flash.

*Some tracks cannot be counted in AUTO BPM mode. In this event, set to manual mode to count the BPM (see page 19).

4Press CH-1 H.P CUE switch.

÷The BPM display LED “1” will light.

÷The BPM of the music input to CH-1 will appear on the

AUTO BPM COUNTER.

*To measure BPM accurately, select only one channel (CH-1 to CH-4 H.P CUE switch) for the AUTO BPM COUNTER.

÷Display when the BPM of CH-1 and CH-2 (126) match.

BPM display

 

LED

 

Counter

 

BPM counter range

 

selector switch

Effect parameter/

 

BPM display

LED

 

 

Counter

18

<DRB1314>

Page 17 Page 19
Image 18
Page 17 Page 19
Contents DJM-3000 DRB1314 Important Notice Features Checking AccessoriesContents Location Installing the DJM-3000 in an EIA rackCleaning the Unit CondensationConnecting audio cords ConnectionsConnection of Input Equipment REC OUT Connection of Outputs, Microphones, etcMaster Level ATT Digital OUTPart Names and Functions MIC 1 LevelMIC 2 Level \ Fader Start Switches CH-1, CH-2, CH-3, CH-4 Booth Monitor ControlPower Switch Headphones Controls Master Master Controls« Beat Effects Controls § Auto BPM CounterEffect MIX Controls Using the Effect Functions Features of Various EffectorsBeat Effector Effects linked to BPM Reverb FilterFlanger Pitch Pitch ShifterEcho DelayItems Set for Each Effect PANTurn on the Effect ON/OFF switch Set the parameter valueOperating Reverb and Pitch Shifter Effector SettingsSet the Effect selector switch to Pitch PitchAdjust the return level Using an External EffectorTurn the Effect ON/OFF switch on Set external effector parameters, etcUsing the Auto Mode to Count BPM Press CH-1 H.P CUE switchBPM Counting Using the Manual Mode to Count BPM Effect parameter/ displays BPM displayCMX-3000 CMX-5000 CDJ-1000 CDJ-100S CDJ-700S CDJ-500 Using the Fader Start FunctionCross Fader Start Play and Back Cue Play DJM-3000Precaution Starting with the Channel FaderStarting with the Cross Fader Effect Mix Fader Mode Using the Effect MIX FunctionEffect Mix Features Effect Mix Auto ModeSelecting the Effect Mix Function Set Effect MIX selector switch to Fader Effect Mix Fader ModeSet the Cross Fader Curve selector switch to Operate the Cross fader LeverEffect Mix Auto Mode Set the Effect MIX selector switch to AutoTroubleshooting Problem Possible Cause CountermeasureAudio Section SpecificationsAccessories Electrical Section, etcCA 90801-1760, U.S.A 800 872Pioneer Electronics of Canada, Inc Allstate Parkway Markham, on L3R OP2 905 877
Top Page Image Contents