Plantronics DJM-3000 Effect Mix Fader Mode, Set the Cross Fader Curve selector switch to

Page 24

USING THE EFFECT MIX FUNCTION

FADER START switches

CROSS FADER CURVE selector switch

EFFECT MIX selector switch

Fader display A

 

Fader display B

 

CROSS FADER ASSIGN

Cross fader lever

CROSS FADER ASSIGN

Effect select/

 

B switch

start switches

A switch

 

 

 

 

Effect Mix Fader Mode

1Using the CROSS FADER ASSIGN switches (A and B) choose the channel (CH1–CH4) connected to the CD player you wish to use with cross fader effects.

Be sure to assign different channels to the CROSS FADER ASSIGN switches A and B.

2Set the CROSS FADER CURVE selector switch to 1 ().

When set to 2 or 3, the sound volume will become lower depending on the setting of the Cross fader lever.

3Set the Cross fader lever to the Effect Mix starting position.

In the Effect Mix Fader mode, the way the sound is initially heard is determined by the starting position of the Cross fader lever. For operating procedures, see step 6.

When the Cross fader lever is near the midway point, sound will be output from both A and B.

When the Cross fader lever is on the A side, sound will be output from A.

When the Cross fader lever is on the B side, sound will be output from the B side.

4Set EFFECT MIX selector switch to FADER.

Of the three Effect select/start switches (ECHO, ZIP, ROLL), the selected one will flash (default setting is ECHO), and the others will light steadily.

The FADER START switch for the assigned channel will automatically turn ON and its indicator will light.

If the settings of the CROSS FADER ASSIGN switches A/ B are changed after setting the EFFECT MIX selector switch to FADER, the corresponding channel’s FADER START switch will automatically turn ON.

6Operate the Cross fader Lever

When the Cross fader lever is moved from side A toward side B, the selected effect is applied to A, and when the lever reaches side B, the B output sound is heard. If the lever is returned to side A from midway, the effect applied to A turns OFF and the normal sound is output.

When the Cross fader lever is moved from side B toward side A, the selected effect is applied to B, and when the lever reaches side A, the A output sound is heard. If the lever is returned to side B from midway, the effect applied to B turns OFF and the normal sound

is output.

[Operation if Cross fader lever is midway when the Effect Mix Fader mode is turned on]

When the Cross fader lever is moved from its initial midway position toward side A, the selected effect is applied to B, and the sound will progressively turn off in accordance with the selected effect.

When the Cross fader lever is moved from its initial midway position toward side B, the selected effect is applied to A, and the sound will progressively turn off in accordance with the selected effect.

In the Effect Mix Fader mode, the Cross fader lever cannot be used to control sound. While the CROSS FADER CURVE selector switch is enabled, BEAT EFFECTS cannot be used.

5Use the Effect select/start switches to choose the desired effect (ECHO, ZIP, ROLL).

The selected Effect select/start switch will flash and the others will light steadily.

Two or more effects cannot be selected at the same time.

The BEAT EFFECT’s effect PARAMETER controls can be used to modify the effect time settings.

24

<DRB1314>

Page 23 Page 25
Image 24
Page 23 Page 25
Contents DJM-3000 DRB1314 Important Notice Features Checking AccessoriesContents Installing the DJM-3000 in an EIA rack Cleaning the UnitLocation CondensationConnecting audio cords ConnectionsConnection of Input Equipment Connection of Outputs, Microphones, etc Master Level ATTREC OUT Digital OUTPart Names and Functions MIC 1 LevelMIC 2 Level Booth Monitor Control Power Switch Headphones Controls\ Fader Start Switches CH-1, CH-2, CH-3, CH-4 Master Master Controls« Beat Effects Controls § Auto BPM CounterEffect MIX Controls Using the Effect Functions Features of Various EffectorsBeat Effector Effects linked to BPM Filter FlangerReverb Pitch Pitch ShifterDelay Items Set for Each EffectEcho PANTurn on the Effect ON/OFF switch Set the parameter valueEffector Settings Set the Effect selector switch to PitchOperating Reverb and Pitch Shifter PitchUsing an External Effector Turn the Effect ON/OFF switch onAdjust the return level Set external effector parameters, etcUsing the Auto Mode to Count BPM Press CH-1 H.P CUE switchBPM Counting Using the Manual Mode to Count BPM Effect parameter/ displays BPM displayUsing the Fader Start Function Cross Fader Start Play and Back Cue PlayCMX-3000 CMX-5000 CDJ-1000 CDJ-100S CDJ-700S CDJ-500 DJM-3000Precaution Starting with the Channel FaderStarting with the Cross Fader Using the Effect MIX Function Effect Mix FeaturesEffect Mix Fader Mode Effect Mix Auto ModeSelecting the Effect Mix Function Effect Mix Fader Mode Set the Cross Fader Curve selector switch toSet Effect MIX selector switch to Fader Operate the Cross fader LeverEffect Mix Auto Mode Set the Effect MIX selector switch to AutoTroubleshooting Problem Possible Cause CountermeasureSpecifications AccessoriesAudio Section Electrical Section, etc800 872 Pioneer Electronics of Canada, IncCA 90801-1760, U.S.A Allstate Parkway Markham, on L3R OP2 905 877
Top Page Image Contents