Plantronics DJM-3000 operating instructions Filter, Flanger, Reverb, Pitch Pitch Shifter

Page 13

USING THE EFFECT FUNCTIONS

5. FILTER

Changes the tone greatly by shifting the filter’s frequency in units of 1/2, 1, 2, 4, 8, 16, and 32 beats.

Example

Frequency

1 cycle = 1/2, 1, 2, 4, 8, 16 or 32 beat

6. FLANGER

Quickly and easily produces 1-cycle flanger effect for beats of 1/2, 1, 2, 4, 8, 16, or 32.

Example

Short delay

1 cycle = 1/2, 1, 2, 4, 8, 16 or 32 beat

7. REVERB

Produces a reverberation effect.

8. PITCH (Pitch Shifter)

Shifts interval (pitch or key) within a range of ±1 octave. As the speed of analog-record turntables and CD players changes as a percent, interval changes can be corrected on a percent basis.

Applying the pitch shifter to microphone sound produces voice changer effects. Mixing with original sound produces a choral effect.

9. Send/Return (SND/RTN: External effect input/output)

Makes diverse effects possible through connection to available effectors, samplers, etc.

<DRB1314>

Image 13

Contents DJM-3000 DRB1314 Important Notice Checking Accessories FeaturesContents Cleaning the Unit Installing the DJM-3000 in an EIA rackLocation CondensationConnections Connecting audio cordsConnection of Input Equipment Master Level ATT Connection of Outputs, Microphones, etcREC OUT Digital OUTMIC 1 Level Part Names and FunctionsMIC 2 Level Power Switch Headphones Controls Booth Monitor Control\ Fader Start Switches CH-1, CH-2, CH-3, CH-4 Master Master Controls§ Auto BPM Counter « Beat Effects ControlsEffect MIX Controls Features of Various Effectors Using the Effect FunctionsBeat Effector Effects linked to BPM Flanger FilterReverb Pitch Pitch ShifterItems Set for Each Effect DelayEcho PANSet the parameter value Turn on the Effect ON/OFF switchSet the Effect selector switch to Pitch Effector SettingsOperating Reverb and Pitch Shifter PitchTurn the Effect ON/OFF switch on Using an External EffectorAdjust the return level Set external effector parameters, etcPress CH-1 H.P CUE switch Using the Auto Mode to Count BPMBPM Counting Effect parameter/ displays BPM display Using the Manual Mode to Count BPMCross Fader Start Play and Back Cue Play Using the Fader Start FunctionCMX-3000 CMX-5000 CDJ-1000 CDJ-100S CDJ-700S CDJ-500 DJM-3000Starting with the Channel Fader PrecautionStarting with the Cross Fader Effect Mix Features Using the Effect MIX FunctionEffect Mix Fader Mode Effect Mix Auto ModeSelecting the Effect Mix Function Set the Cross Fader Curve selector switch to Effect Mix Fader ModeSet Effect MIX selector switch to Fader Operate the Cross fader LeverSet the Effect MIX selector switch to Auto Effect Mix Auto ModeProblem Possible Cause Countermeasure TroubleshootingAccessories SpecificationsAudio Section Electrical Section, etcPioneer Electronics of Canada, Inc 800 872CA 90801-1760, U.S.A Allstate Parkway Markham, on L3R OP2 905 877