Plantronics DJM-3000 operating instructions Features, Checking Accessories, Contents

Page 4

FEATURES

Effect Mixing

Changing between three kinds of effect mix (ECHO, ZIP, ROLL) can be performed easily merely by operating the Cross fader lever, or by pressing the Effect select/start switch.

BPM Counter

The auto BPM counter provided makes music tempo visible to the eye.

Peak Level Meter

The peak level meter provided is equipped with 11-bit LED indicators for all channels.

Fader Start/Stop

The CD player can be started or stopped simply by increasing or decreasing the level of the cross fader or channel fader. (This function can only be used when the Pioneer CD player series CMX-3000, CMX-5000, CDJ-1000, CDJ-100S, CDJ- 700S or CDJ-500 II is connected.)

3-Band Equalizer and Kill

This 3-band equalizer corresponds to the HI, MID, and LOW channels. The attenuation level also serves as a kill function, which can decrease the level to –26 dB.

Variety of Effects

Both internal and external effects can be applied to all channels, the microphone, and master.

A variety of effects can be enjoyed, including delay, echo, auto pan, auto trans, filter, flanger, reverb and pitch shifter.

Full range of input and output functions

This DJ Mixer is equipped with 4 (+3*) LINE inputs, 4 PHONO (dedicated MM) inputs, and 2 (+1*) MIC inputs, for a total of 10 inputs. In addition to 2 master output lines (one supporting professional-grade XLR mode), a variety of other independent outputs are also provided, including booth monitor output, recording output, and two digital outputs. SEND/RETURN jacks are also provided for the connection of external effects units.

*These additional connectors can optionally be switched from PHONO input to make up the total.

CHECKING ACCESSORIES

÷2 short-circuit pin plugs

These are inserted in the PHONO 4 terminals.

÷Operating instructions

÷Warranty

4

CONTENTS

 

FEATURES

4

CHECKING ACCESSORIES

4

CAUTIONS REGARDING HANDLING

5

Location

5

Installing the DJM-3000 in an EIA rack

5

Condensation

5

Cleaning the Unit

5

CONNECTIONS

6

PART NAMES AND FUNCTIONS

8

USING THE EFFECT FUNCTIONS

12

Features of Various Effectors

12

Delay, Echo, Auto Pan, Auto Trans, Filter,

 

and Flanger Operations

14

Operating Reverb and Pitch Shifter

16

Using an External Effector

17

BPM COUNTING

18

Using the Auto Mode to Count BPM

18

Using the Manual Mode to Count BPM

19

USING THE FADER START FUNCTION

20

Starting with the Channel Fader

21

Starting with the Cross Fader

21

USING THE EFFECT MIX FUNCTION

22

Effect Mix Features

22

Selecting the Effect Mix Function

23

Effect Mix Fader Mode

24

Effect Mix Auto Mode

25

TROUBLESHOOTING

26

SPECIFICATIONS

27

<DRB1314>

Page 3 Page 5
Image 4
Page 3 Page 5
Contents DJM-3000 DRB1314 Important Notice Checking Accessories FeaturesContents Installing the DJM-3000 in an EIA rack Cleaning the UnitLocation CondensationConnections Connecting audio cordsConnection of Input Equipment Connection of Outputs, Microphones, etc Master Level ATTREC OUT Digital OUTMIC 1 Level Part Names and FunctionsMIC 2 Level Booth Monitor Control Power Switch Headphones Controls\ Fader Start Switches CH-1, CH-2, CH-3, CH-4 Master Master Controls« Beat Effects Controls § Auto BPM CounterEffect MIX Controls Features of Various Effectors Using the Effect FunctionsBeat Effector Effects linked to BPM Filter FlangerReverb Pitch Pitch ShifterDelay Items Set for Each EffectEcho PANTurn on the Effect ON/OFF switch Set the parameter valueEffector Settings Set the Effect selector switch to PitchOperating Reverb and Pitch Shifter PitchUsing an External Effector Turn the Effect ON/OFF switch onAdjust the return level Set external effector parameters, etcPress CH-1 H.P CUE switch Using the Auto Mode to Count BPMBPM Counting Using the Manual Mode to Count BPM Effect parameter/ displays BPM displayUsing the Fader Start Function Cross Fader Start Play and Back Cue PlayCMX-3000 CMX-5000 CDJ-1000 CDJ-100S CDJ-700S CDJ-500 DJM-3000Starting with the Channel Fader PrecautionStarting with the Cross Fader Using the Effect MIX Function Effect Mix FeaturesEffect Mix Fader Mode Effect Mix Auto ModeSelecting the Effect Mix Function Effect Mix Fader Mode Set the Cross Fader Curve selector switch toSet Effect MIX selector switch to Fader Operate the Cross fader LeverEffect Mix Auto Mode Set the Effect MIX selector switch to AutoTroubleshooting Problem Possible Cause CountermeasureSpecifications AccessoriesAudio Section Electrical Section, etc800 872 Pioneer Electronics of Canada, IncCA 90801-1760, U.S.A Allstate Parkway Markham, on L3R OP2 905 877
Top Page Image Contents