USING THE FADER START FUNCTION
Starting with the Channel Fader
1Turn on the FADER START switch
The indicator for the selected channel will light.
2Push the Channel fader lever all the way to the bottom.
3Set a cue point on the CD player, and set the unit to standby (pause) at the cue point.
4When you want to start the player, push up the Channel fader lever and the CD player will begin playing.
Precaution:
÷Channels selected with the CROSS FADER ASSIGN A and B switches cannot be started with the channel fader.
The following is an example of starting a CD player connected to
Example:
FADER START
switch
Channel fader lever
If cue points have been set in advance when using the
If the Channel fader lever is returned to its original position after playing has started, the CD player will return to the cue point and be on standby.
Starting with the Cross Fader
1Turn on the FADER START switch
The indicator for the selected channel will light.
2Using the CROSS FADER ASSIGN A and B switches, select the channel
3Slide the Cross fader lever all the way in direction opposite the source you want to start.
In the following example, startup is done with the CD player connected to
Example:
ASSIGN A switch | Cross fader lever |
4Set a cue point on the CD player, and set the unit to standby (pause) at the cue point.
5Use the CROSS FADER CURVE selector switch to select the cross fader startup curve.
6When the Cross fader lever is slid in the opposite direction as in “3”, the CD player will begin playing.
ASSIGN A switch | Cross fader lever |
If cue points have been set in advance when using the
If the Cross fader lever is returned to its original position after playing has started, the CD player will return to the cue point and be on standby.
21