Plantronics DJM-3000 800 872, Pioneer Electronics of Canada, Inc, CA 90801-1760, U.S.A

Page 28

Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer Authorized Independent Service Company, or if you wish to purchase replacement parts, operating instructions, service manuals, or accessories, please call the number shown below.

800 – 872 – 4159

Please do not ship your product to Pioneer without first calling the Customer Support Division at the above listed number for assistance.

PIONEER ELECTRONICS (USA), INC.

CUSTOMER SUPPORT DIVISION

P.O. BOX 1760, LONG BEACH,

CA 90801-1760, U.S.A.

For warranty information please see the Limited Warranty sheet included with your product.

Should this product require service in Canada, please contact a Pioneer Canadian Authorized Dealer to locate the nearest Pio- neer Authorized Service Company in Canada.

Alternatively, please contact the Customer Service Department at the following address:

Pioneer Electronics of Canada, Inc.

300 Allstate Parkway

Markham, ON L3R OP2

(905)479-4411

1 (877) 283-5901

For warranty information please see the Limited Warranty sheet included with your product.

Published by Pioneer Corporation.

Copyright © 2001 Pioneer Corporation.

All rights reserved.

PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS (USA) INC.

Multimedia and Mass Storage Division: 2265 East 220th Street, Long Beach, CA 90810, U.S.A. TEL: 800-444-OPTI (6784)

PIONEER ELECTRONICS OF CANADA, INC.

Industrial Products Department: 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: 905-479-4411

<TSZRZ/01L00000>

Printed in China <DRB1314-A>

Image 28

Contents DJM-3000 DRB1314 Important Notice Checking Accessories FeaturesContents Installing the DJM-3000 in an EIA rack Cleaning the UnitLocation CondensationConnections Connecting audio cordsConnection of Input Equipment Connection of Outputs, Microphones, etc Master Level ATTREC OUT Digital OUTMIC 1 Level Part Names and FunctionsMIC 2 Level Booth Monitor Control Power Switch Headphones Controls\ Fader Start Switches CH-1, CH-2, CH-3, CH-4 Master Master Controls« Beat Effects Controls § Auto BPM CounterEffect MIX Controls Features of Various Effectors Using the Effect FunctionsBeat Effector Effects linked to BPM Filter FlangerReverb Pitch Pitch ShifterDelay Items Set for Each EffectEcho PANTurn on the Effect ON/OFF switch Set the parameter valueEffector Settings Set the Effect selector switch to PitchOperating Reverb and Pitch Shifter PitchUsing an External Effector Turn the Effect ON/OFF switch onAdjust the return level Set external effector parameters, etcPress CH-1 H.P CUE switch Using the Auto Mode to Count BPMBPM Counting Using the Manual Mode to Count BPM Effect parameter/ displays BPM displayUsing the Fader Start Function Cross Fader Start Play and Back Cue PlayCMX-3000 CMX-5000 CDJ-1000 CDJ-100S CDJ-700S CDJ-500 DJM-3000Starting with the Channel Fader PrecautionStarting with the Cross Fader Using the Effect MIX Function Effect Mix FeaturesEffect Mix Fader Mode Effect Mix Auto ModeSelecting the Effect Mix Function Effect Mix Fader Mode Set the Cross Fader Curve selector switch toSet Effect MIX selector switch to Fader Operate the Cross fader LeverEffect Mix Auto Mode Set the Effect MIX selector switch to AutoTroubleshooting Problem Possible Cause CountermeasureSpecifications AccessoriesAudio Section Electrical Section, etc800 872 Pioneer Electronics of Canada, IncCA 90801-1760, U.S.A Allstate Parkway Markham, on L3R OP2 905 877