Plantronics DJM-3000 Using an External Effector, Turn the Effect ON/OFF switch on

Page 17

USING THE EFFECT FUNCTIONS

4Turn the Effect ON/OFF switch on.

÷The Effect ON/OFF switch will flash orange and the effect (pitch shift) will be applied to master output.

÷If the switch is pressed once more, the effect will turn off.

Reverb can be set similarly.

Precautions:

÷If the channel has been changed with the Effect CH. SELECT switch when delay, echo (pages 14 and 15), reverb and similar effects have been turned on, all of the reverberation of the prior channel’s effects will be output.

÷Only operate the Effect selector switch when effects are off (when the Effect ON/OFF switch is lit orange). Operating it with effects on could generate noise.

÷Display when CH-3 has been pitch-shifted by 90%.

BPM display

Effect parameter/

 

BPM display

LED

 

 

Counter

 

Beat display

 

Effect beat selector

 

switches

Using an External Effector

The following example is for applying external effects to music on CH-3.

1Set the Effect selector switch to SND/RTN.

2Set the Effect CH. SELECT switch to 3.

÷ The Effect parameter/BPM display LED “3” will light.

3Set external effector parameters, etc.

÷When the H.P CUE switch (in the BEAT EFFECTS controls) is pressed, the effect can be confirmed by listening to the headphones output.

4Adjust the return level.

÷The return level from the external effector can be adjusted with the Effect PARAMETER 2 control (LEVEL/DEPTH).

* Effect PARAMETER 1 control (TIME) will not function.

5Turn on the Effect ON/OFF switch.

÷The Effect ON/OFF switch will flash orange, and the external effect will be applied to music on CH-3.

÷Pressing the switch once more will turn the effect off.

÷Display when an external effect has been applied to CH-3.

BPM display

Effect parameter/

 

BPM display

LED

 

17

<DRB1314>

Page 16 Page 18
Image 17
Page 16 Page 18
Contents DJM-3000 DRB1314 Important Notice Contents FeaturesChecking Accessories Cleaning the Unit Installing the DJM-3000 in an EIA rackLocation CondensationConnection of Input Equipment Connecting audio cordsConnections Master Level ATT Connection of Outputs, Microphones, etcREC OUT Digital OUTMIC 2 Level Part Names and FunctionsMIC 1 Level Power Switch Headphones Controls Booth Monitor Control\ Fader Start Switches CH-1, CH-2, CH-3, CH-4 Master Master Controls§ Auto BPM Counter « Beat Effects ControlsEffect MIX Controls Beat Effector Effects linked to BPM Using the Effect FunctionsFeatures of Various Effectors Flanger FilterReverb Pitch Pitch ShifterItems Set for Each Effect DelayEcho PANSet the parameter value Turn on the Effect ON/OFF switchSet the Effect selector switch to Pitch Effector SettingsOperating Reverb and Pitch Shifter PitchTurn the Effect ON/OFF switch on Using an External EffectorAdjust the return level Set external effector parameters, etcBPM Counting Using the Auto Mode to Count BPMPress CH-1 H.P CUE switch Effect parameter/ displays BPM display Using the Manual Mode to Count BPMCross Fader Start Play and Back Cue Play Using the Fader Start FunctionCMX-3000 CMX-5000 CDJ-1000 CDJ-100S CDJ-700S CDJ-500 DJM-3000Starting with the Cross Fader PrecautionStarting with the Channel Fader Effect Mix Features Using the Effect MIX FunctionEffect Mix Fader Mode Effect Mix Auto ModeSelecting the Effect Mix Function Set the Cross Fader Curve selector switch to Effect Mix Fader ModeSet Effect MIX selector switch to Fader Operate the Cross fader LeverSet the Effect MIX selector switch to Auto Effect Mix Auto ModeProblem Possible Cause Countermeasure TroubleshootingAccessories SpecificationsAudio Section Electrical Section, etcPioneer Electronics of Canada, Inc 800 872CA 90801-1760, U.S.A Allstate Parkway Markham, on L3R OP2 905 877
Top Page Image Contents