Plantronics DJM-3000 Using the Fader Start Function, Cross Fader Start Play and Back Cue Play

Page 20

USING THE FADER START FUNCTION

If the separately sold CMX-3000, CMX-5000, CDJ-1000, CDJ-100S, CDJ-700S and CDJ-500 II players are connected to CH-1 – CH- 4, they can be started using the Channel fader lever or Cross fader lever, as long as the control cords have been connected.

 

CROSS FADER CURVE

 

selector switch

CROSS FADER

Cross fader lever

ASSIGN A switch

 

Fader Start Play (To Use Fade-in Operation with a Connected CD Player)

Channel fader lever

FADER START switches

CROSS FADER

ASSIGN B switch

Fader start play will be possible when the unit has been connected with control cords to the CMX-3000, CMX- 5000, CDJ-1000, CDJ-100S, CDJ-700S, and CDJ-500 II CD players for DJs. In other words, when the DJ mixer’s channel fader or cross fader volume is turned up, the CD player’s pause function will be released, and the music will start automatically and instantly. In addition, because the CD player can be restored to the cue point when the fader is returned to its original position, sampler-type play is also possible.

Cross Fader Start Play and Back Cue Play

When “A” is at the cue point during standby, it can be started simply by moving the Cross fader lever from the right (B) side to the left (A) side. “B” will back cue (return to the cue point) at the same time.

Moreover, when “B” is at the cue point during standby, it can be started simply by moving the Cross fader lever from the left (A) side to the right (B) side. (“A” will back cue at the same time.)

CD players for which fader start play is possible when connected to this unit

CMX-3000

CMX-5000

CDJ-1000

CDJ-100S

CDJ-700S

CDJ-500 II

CMX-3000

A

B

Control cords

DJM-3000

Cross fader lever

Channel fader lever

20

<DRB1314>

Page 19 Page 21
Image 20
Page 19 Page 21
Contents DJM-3000 DRB1314 Important Notice Contents FeaturesChecking Accessories Installing the DJM-3000 in an EIA rack Cleaning the UnitLocation CondensationConnection of Input Equipment Connecting audio cordsConnections Connection of Outputs, Microphones, etc Master Level ATTREC OUT Digital OUTMIC 2 Level Part Names and FunctionsMIC 1 Level Booth Monitor Control Power Switch Headphones Controls\ Fader Start Switches CH-1, CH-2, CH-3, CH-4 Master Master Controls« Beat Effects Controls § Auto BPM CounterEffect MIX Controls Beat Effector Effects linked to BPM Using the Effect FunctionsFeatures of Various Effectors Filter FlangerReverb Pitch Pitch ShifterDelay Items Set for Each EffectEcho PANTurn on the Effect ON/OFF switch Set the parameter valueEffector Settings Set the Effect selector switch to PitchOperating Reverb and Pitch Shifter PitchUsing an External Effector Turn the Effect ON/OFF switch onAdjust the return level Set external effector parameters, etcBPM Counting Using the Auto Mode to Count BPMPress CH-1 H.P CUE switch Using the Manual Mode to Count BPM Effect parameter/ displays BPM displayUsing the Fader Start Function Cross Fader Start Play and Back Cue PlayCMX-3000 CMX-5000 CDJ-1000 CDJ-100S CDJ-700S CDJ-500 DJM-3000Starting with the Cross Fader PrecautionStarting with the Channel Fader Using the Effect MIX Function Effect Mix FeaturesEffect Mix Fader Mode Effect Mix Auto ModeSelecting the Effect Mix Function Effect Mix Fader Mode Set the Cross Fader Curve selector switch toSet Effect MIX selector switch to Fader Operate the Cross fader LeverEffect Mix Auto Mode Set the Effect MIX selector switch to AutoTroubleshooting Problem Possible Cause CountermeasureSpecifications AccessoriesAudio Section Electrical Section, etc800 872 Pioneer Electronics of Canada, IncCA 90801-1760, U.S.A Allstate Parkway Markham, on L3R OP2 905 877
Top Page Image Contents