Operation
Using the Mixers with the 856X Series Spectrum Analyzers
Identify signals in wide frequency spans
7.SIG ID AT MKR identifies signals in wide frequency spans, using harmonic search. SIG ID AT MKR automatically determines the proper frequency of a signal and displays its value on the spectrum analyzer.
•Activating SIG ID AT MKR on an image of the signal will yield a reading in the active block, as shown in Figure
8.To activate SIG ID AT MKR:
a. Place a marker on a signal.
b. Press AUX CTRL, EXTERNAL MIXER, SIGNAL IDENT, SIG ID AT MKR.
9.To exit the external mixer mode, press AUX CTRL, then INTERNAL MIXER.
Figure 2-14 SIG ID AT MKR Performed on an Image Signal
Operation
36 | Chapter 2 |