Agilent Technologies 11970-90031 manual Using the Mixers with MMS Analyzers, Preliminary Operation

Operation

Using the Mixers with MMS Analyzers

Using the Mixers with MMS Analyzers

Preliminary Operation

NOTE	This section provides information for the Agilent 70907A (or B), however the
	operation of the Agilent 70909A and Agilent 70910A is similar. Minor
	differences may be noted, but the necessary deviations from these exact
	instructions will be obvious.

Equipment Connection

Connect the equipment as shown in Figure 2-16Use the following checklist to verify the connections:

•Agilent 11970 LO IN to Agilent 70907B LO OUTPUT (SMA cable, 5061-5458)

•Agilent 11970 IF OUT to Agilent 70907B IF INPUT (SMA cable, 5061-5458)

Figure 2-16Agilent 11970 Connections to the Agilent 71000 Series Spectrum Analyzer

Operation

38 Chapter 2