Agilent Technologies 11970-90031 manual Set up the equipment, Harmonic Mixer Setup

Operation

Using the Mixers with the E4407B Spectrum Analyzer (Option AYZ)

Using the Mixers with the E4407B Spectrum Analyzer (Option AYZ)

The Agilent Technologies E4407B spectrum analyzer contains an extensive menu of functions that help with millimeter measurements. The following examples explain how to connect external mixers to the spectrum analyzer, how to choose the band of interest, how to store and activate conversion-loss factors, and how to use the signal-identification functions.

Set up the equipment

1. Connect the signal source and harmonic mixer to the analyzer, as shown in Figure 2-2.

Figure 2-2 Harmonic Mixer Setup

Operation

NOTE	Agilent 5061-5458 SMA type cables should be used to connect the mixer IF
	and LO ports to the analyzer. Do not over-tighten the cables. The maximum
	torque should not exceed 112 N-cm (10 in-lb.)

22 Chapter 2