Agilent Technologies 11970-90031 manual Average Noise Test Record, Average Noise Level

Performance Tests

AVERAGE NOISE LEVEL TEST

-104 dBm (for the 11970Q) -104 dBm (for the 11970U) -92 dBm (for the 11970V)

-85 dBm (for the 11970W)

18.Enter the following push button commands on the 8566A/B:

MARKER, OFF

REFERENCE LEVEL, 0, dBm

19.Repeat steps 9 through 17 at the following center frequencies: 11970K: 22 and 26.5 GHz

11970A: 33 and 40 GHz

11970Q: 41 and 50 GHz

11970U: 50 and 60 GHz

11970V: 62 and 75 GHz

11970W: 92 and 110 GHz

20.Repeat steps 1 through 18 for a power level of 16.0 dBm at the 11970 Mixer LO connector.

Table 3-8 Average Noise Test Record

	AVERAGE NOISE LEVEL
	Model Number______________ Date______________
	Serial Number________________ Tested By______________
		Center	Power	Power	Directional	Corrected	Signal	Noise	Bandwidth	Average
		Frequency	Meter	Meter	Coupler	Power	Marker	Floor	Correction	Noise
			Reading	Correction	Coupling	REading	Amplitude	Marker	Factor	Level
				Factor	Factor			Amplitude
	Units	GHz	dBm	dB	dB	dBm	dBm	dB	dB	dBm
	Step	10	12	13	13	13	14	15	16	16
	LO
	Power
	= 14.5
	LO
	Power
Performance Tests	= 16.0

72 Chapter 3