Multiquip WM63H8, WM63H5 manual Nameplate and decals, Safety Instructions

nameplate and decals

4

5

	SAFETY
	INSTRUCTIONS
1. Read owner’s manual
	before operating.
2.	Keep unauthorized and untrained
	people away from machine during
	operation.
3.	Make sure all safety devices are in
	place before this machine is started.	6
4.	Make sure engine is turned off and
	spark plug wire is disconnected before
	cleaning the machine.

5.Keep hands and fingers away from moving objects.

6.Do not operate machine in an enclosed area, proper ventilation is required.

7.Never leave machine unattended when operating.

8.Always stop engine and allow engine to cool before adding fuel or oil.

P/N 520935

7

3

WARNING

To avoid injury, you MUST read and understand operator’s manual before using this machine.

Keep safety grate, guards and doors in place. Shut off engine or electric motor before inspection or maintenance.

WARNING

Stand clear of dump handle handle kick-back Is possible.

	WARNING
	To avoid injury, you MUST read and
	understand operator’s manual before
	using this machine.
	Keep safety grate, guards and doors
	in place. Shut off engine or electric
3	motor before inspection or maintenance.
	Moving parts can cut and crush.
	SHUT OFF engine or electric motor
	before placing hands in mixing drum.

Moving parts can cut and crush. SHUT OFF engine or electric motor before placing hands in mixing drum.

This machine to be operated by qualified personnel only. Ask for training as needed.

P/N 521229

8

Wear appropriate dust mask head, hearing and Eye protection when operating this equipment.

Crush hazard area keep hands and fingers Clear of safety grate at all times.

		This machine to be operated by qualified
		personnel only. Ask for training as needed.
		P/N 521229
		DANGER
2	Gasoline is highly flammable.
	DO NOT smoke around or near the equipment.
	Fire or explosion could result from fuel vapors or
	if fuel is spilled on a hot engine!
		P/N 521228
1		PUSH
		TO STOP
		EM948630

11

4

CAUTION

INSPECT BEFORE TOWING

TIGHTNESS OF WHEEL NUTS

TIRE PRESSURE

1.Use manufacturer’s recommended torque values when tightening wheel lug nuts.

2.Use manufacturer’s recommended tire pressure values when inflating tires. DO NOT exceed recommended tire pressure.

P/N 521232

Moving parts can crush and cut.

Do not operate with guard removed

Follow lockout procedure before servicing.

P/N 521230

CAUTION
DRUM LOCK POSITIONING
SEE OPERATION MANUAL FOR PROPER
DRUM LOCK POSITIONING
LEGEND
REPRESENTS LOCK PIN		9
REPRESENTS DRUM STOP BLOCK
MIX	TOW
		CIP?????

10

MODEL

SERIAL

page 40 — wm63-series Mixer • operation and parts manual — rev. #0 (09/27/12)