safety information
Fuel saFeTY (gasoline models onlY)
danger
do noT start the engine near spilled fuel or combustible fl uids. Fuel is extremely fl ammable and its vapors can cause an explosion if ignited.
alwaYs refuel in a
alwaYs use extreme caution when working with flammable liquids.
do noT fi ll the fuel tank while the engine is running or hot.
do noT overfi ll tank, since spilled fuel could ignite if it comes into contact with hot engine parts or sparks from the ignition system.
Store fuel in appropriate containers, in
never use fuel as a cleaning agent.
do noT smoke around or near the equipment. Fire or explosion could result from fuel vapors or if fuel is spilled on a hot engine.
generaTor saFeTY
If using a generator to power mixer, refer to applicable generator manual safety information section.
eleCTriC moTor saFeTY (eleCTriC models onlY)
NOTICE
Operate electric motor only at the specifi ed voltage indicated on the nameplate.
do noT spray water onto electric motor.
alwaYs disconnect AC power plug from power source before moving mixer.
alwaYs make sure the ON/OFF switch on the electric motor is in the OFF position when not in use and before inserting the mixer’s power plug into an AC receptacle.
power Cord/Cable safety
danger
never let power cords or cables lay in water.
never use damaged or worn cables or cords when connecting equipment to generator. Inspect for cuts in the insulation.
never grab or touch a live power cord or cable with wet hands. The possibility exists of electrical shock, electrocution or death.
Make sure power cables are securely connected. Incorrect connections may cause electrical shock and damage to the mixer.
CauTion
Ensure that cables and cords will not be tripped over or trapped underneath the mixer.
NOTICE
alwaYs make certain that proper power or extension cord has been selected for the job.
TransporTing saFeTY
CauTion
never allow any person or animal to stand underneath the equipment while lifting.
NOTICE
alwaYs make sure forklift forks are inserted into pockets (if applicable) as far as possible when lifting the mixer.
alwaYs shutdown engine before transporting.
never lift the equipment while the engine is running.
Tighten fuel tank cap securely and close fuel cock to prevent fuel from spilling.
do noT lift machine to unnecessary heights.
alwaYs tie down equipment during transport by securing the equipment with rope.
never tip the engine to extreme angles during lifting as it may cause oil to gravitate into the cylinder head, making the engine start diffi cult.