Rehearsing Ping-Pong
8.Press the [REHE] button.
The REHE indicators flash.
9.Press the [PLAY] button to start the rehearsal.
The rehearsal starts and the PLAY indicators light up. The REHE indicators stop flashing and light up continuously.
You should now be able to hear the source tracks combined.
10.Use the faders to balance the source track levels and apply EQ as required.
To monitor individual tracks, press the MONITOR SELECT [CUE] button and use the indi- vidual CUE LEVEL controls.
Repeat the
Performing Ping-Pong for Real
11.Press the [
] SONG SEARCH button to locate the beginning of the song.
12.Press the [REC] button.
The REC indicators flash.
13.Press the [PLAY] button to start recording.
The
14.When the song has finished, press the [STOP] button.
Checking the Ping-Pong Operation
15.Press the [
] SONG SEARCH button to locate the beginning of the song.
16.Press the MONITOR SELECT [GROUP] switch that you pressed previously to monitor the destination track.
17.Press the MONITOR SELECT [STEREO] switch to listen to the Stereo Bus signal.
Alternatively, press MONITOR SELECT [CUE] and set the destination track’s/channel’s [FLIP] switch back to MIC/LINE (up position).You also need to set the CUE LEVEL control of the destination track to midway.
18.Press the [PLAY] button to start playback.
You should now be able to hear the new combined track.