Yamaha owner manual Buying Discs for the MD8, Type Logo Description, MiniDisc

Page 11

Buying Discs for the MD8 3

Buying Discs for the MD8

It’s important that you buy the correct type of disc for use with your MD8. For 8-track recording and playback, you must use MD DATA discs. Regular MiniDiscs can only be used for 2-track recording and playback (2TR mode).

MD DATA discs are used as a storage media for computers. The MD8 uses the MD DATA audio format to store data on them. Regular MiniDiscs are also referred to as MD discs, although they are used only for music.

Type

 

Logo

Description

 

 

 

 

 

 

 

 

 

MD DATA discs are for computer data storage

 

 

 

 

applications. You can purchase them at com-

 

 

 

 

MD DATA

 

 

 

puter stores. This is the type of disc you should

 

 

 

buy for 8-track recording and playback with your

 

 

 

 

MD8. Note that there are two types available:

 

 

 

 

playback only and rewritable. Buy the rewritable

 

 

 

 

type.

 

 

 

 

 

 

 

 

 

MiniDiscs are used only for music. Two types are

 

 

 

 

MiniDisc

 

 

 

available: playback only and recordable. The MD8

 

 

 

can record up to two tracks on the recordable

 

 

 

 

 

 

 

 

type and play the playback only type.

 

 

 

 

 

 

 

 

 

New MD DATA discs do not require formatting before use with the MD8. Discs that have been used to store computer data, however, must first be formatted. See Erasing Discs on page 62.

Regular MiniDisc decks cannot play MD DATA discs.

Regular MiniDiscs recorded on the MD8 can be played on a regular MiniDisc deck.

MiniDisc recordings made on a regular MiniDisc deck can be edited on the MD8. MiniDiscs containing songs that were digitally copied from a commercial CD, however, cannot be edited due to the SCMS (Serial Copy Management System) protection system.

MD8 TOC

TOC refers to the Table Of Contents area on a disc. The TOC contains information about what is recorded on the disc, the disc title, song titles, and so on. The TOC EDIT indicator lights up when the TOC needs to be updated, usually after a new recording or edit.You must update the TOC before ejecting a disc or turning off the MD8. It’s also a good idea to update the TOC at regular intervals just in case of a power failure. Failure to update the TOC can result in data being lost. For example, if you record something but do not update the TOC, your data will be lost if the MD8 is inadvertently turned off, the power cord accidentally dis- connected, or a power failure occurs.

Note: If you press the EJECT button while TOC EDIT is shown on the display, the disc will not eject. Press [TOC WRITE] (STOP) to update the TOC, and then eject the disc.

MD8—Owner’s Manual

Image 11
Contents Multitrack MD Recorder Varoitus Safety Instructions Read the Following Before Operating the MD8 Keep This Manual For Future Reference Contents Repeat, Cue List & Program Play 10. MD8 Applications Recorder MD8 FeaturesWelcome to the MD8 MixerWelcome to the MD8 MiniDisc Buying Discs for the MD8Type Logo Description Topside View Touring the MD8Input Channels Fader Group Assign switchesPAN control Master Section TOC Edit indicator Status indicatorsPitch indicators MTC, Midi CLK, and MMC indicatorsTrack record indicators Repeat mode indicatorsAuto Punch indicator & OUT indicatorsSong Search buttons Disc Transport SectionDisc Transport buttons Auto Punch I/O buttonDisplay button B Repeat buttonsRepeat button Mark Search & Mark buttonsRear Panel Power ON/OFF switchMIC/LINE INPUTs Line Input 9-10/11-12Track Direct OUTs MIC/LINE INPUTs 1Phantom Power ON/OFF switch Front ConnectorsQuick-Start System First SessionRecording the First Track Connecting the Power CordTurning on the MD8 Loading a DiscGRP Method Making the Connections GRP & DIRListening to the First Track DIR MethodMonitoring & Recording GRP & DIR Press the Play button to play back what you‘ve recorded OverdubbingRecord the Final Mix to your stereo master recorder MixdownMix and refine your music as follows Advanced Multitracking An Overview of Multitrack RecordingBasic Multitracking About Monitoring Up MIC/LINE Track 1 disc Input 1 jack/XLR Multi-Source MixingRecord the final mix to your stereo master recorder Mix and refine your music as described onSearching for Blanks Recording & Mixing TechniquesRecording a New Song Minutes Disc Setting the Recording ModeUse the Data dial to select a Recording mode Rec Mode Tracks Used Recording TimeRecording Titling Discs & SongsPress the Stop button to stop playback Using the REC ButtonManual Punch In/Out Using the REC Select buttons Press the footswitch to start playback Using a FootswitchAuto Punch In/Out Setting the In/Out Points On-the-FlyUsing SET and Last REC Search Single Take Auto Punch In/Out Play Record WaitRecord Leaving Auto Punch In/Out mode Auto Punch with a FootswitchMulti Take Auto Punch In/Out Go back to above Press Enter to prepare for recording the second takeUse the Data dial to select the Take you want to audition Auditioning Your TakesSetting the Pre-Roll & Post-Roll Times Tracks Ping-Pong RecordingSource Tracks Preparing for Ping-PongSet the faders on the source channels to the 7-8 mark Set the Monitor Level control as requiredChecking the Ping-Pong Operation Rehearsing Ping-PongPerforming Ping-Pong for Real Destination Track Overdub Source Ping-Pong with OverdubContinue with Preparing for Ping-Pongon Toggling Between FIX & Vari Pitch Adjusting the PitchPitch Mode Before Indicators Using a FootswitchApplying Effects at Mixdown Applying EffectsSet the effects processor as required Applying Effects when RecordingApplying Effects with Ping-Pong From processor’s output Patching in Signal ProcessorsShuttle Playback Function Cue/Review Quick Search FunctionsSearching for Songs Rewind & Fast ForwardTo return to normal playback speed, press Play again Searching for the Last Rec in & OUT PointsLocating Specific Points Original Song Marker IndicatorsSearching for Markers Inserting MarkersPress the Adjust button Adjusting MarkersAdjusting Markers After Erase Erasing MarkersPress the Enter button to erase the marker Before EraseAll Song Repeat Press the Repeat button to cancel All Song Repeat playbackRepeat, Cue List & Program Play One Song RepeatRepeat Song Press the Repeat button to cancel A-B RepeatRepeat Cue List Cue List Playback & CopyUse the Data dial to select Edit or NEW Program Program PlaybackPress the Play button to start Program playback Editing Songs & Tracks Viewing Disc ContentsUse the Data dial to select the Song that you want to copy Erasing DiscsCopying & Converting Songs Press the Enter button to copy Use the Data dial to select another trackUse the Data dial to select a blank area After Renumbering SongsBefore Song CopyPress Enter once more to move the song to the new position Moving SongsPress Enter to renumber the songs Song 1 after divide Dividing SongsPress the Enter button to divide Song 1 before divideSong Before combine After combine Combining SongsPress the Enter button to combine Press the Enter button to erase Erasing SongsErasing Tracks Use the Data dial to select the song you want to eraseAfter Part Erase Erasing PartsPress Enter again to erase Before Part ErasePress Enter again to copy Copying TracksSource Track Copying PartsPeak Hold Other FunctionsFrame Display Display DimmerAbout Tempo Maps Using the MD8 in a Synchronized Midi SystemMD8 & Midi Setting Up a Synchronized Midi System Use the Data dial to select MTC Midi Timecode Using MTCSetting the MD8 for MTC Operation Setting the Midi Sequencer MTC Cabling NoteProgramming the Tempo Map Using Midi ClockSetting the Midi Sequencer A once again flashes on the display Deleting Steps in a Tempo Map 001 2/4 010 3/4 005 6/8 000 4/4Use the Data dial to select Mclk Midi Clock Selecting Midi Clock for synchronizationSaving a Tempo Map Function Controlling the MD8 with MMCUse the Data wheel to set this parameter to on or OFF Setting the MMC Device IDEnabling MMC Press the Enter button to return to the Utility menuMeter Step Measure Time Tempo Map ChartOne-Take Recording 10 MD8 ApplicationsMidi Home Studio Track transfer Using the MD8 with Another MixerMarkers Beyond the BasicsEffects Return Monitoring Pitch ApplicationsMixdown What’s the difference between MiniDiscs and MD Data Discs? 12 Q&A SectionHow many songs can I store on an MD Data disc? Troubleshooting Not work MMC remote control doesMidi sequencer does not Synchronize to the MD8MD8 Transport Modes AppendixMessage Meaning Display MessagesDigital/Audio SpecificationsSpecifications subject to change without notice GeneralBlock Diagram Dimensions Glossary Midi Timecode-SeeMTC Glossary Numerics IndexHigh EQ MTC Vari Midi Implementation Chart Session Info