Peavey RQ 2300 Series Headphone Output, HEADPHONE/PFL Level, PFL Active, Return 1 to Monitor

16.HEADPHONE OUTPUT:

This stereo jack (TRS) provides the signal to drive stereo headphones. The level is set by the Headphone Level control (17). Tip= Left, Ring= Right, Shield= Ground.

17.HEADPHONE/PFL LEVEL:

Adjusts the level of the Headphone Output. The source changes from the L-R output to the PFL mix whenever the PFL is active.

18.PFL ACTIVE:

This LED blinks when the PFL is active and its signal is overriding the standard L-R mix in the Headphone and at the L/R meters. The signals that are present in the PFL mix can be located by the individually illuminated channel PFL LEDs.

19

20

21

22

23 27

2429

25 28

26

19.RETURN 1 TO MONITOR 1:

Sets the level of the Return 1 signal (effects) that is added to the Monitor 1 mix. This is a mono mix of the left and right signals.

20.RETURN 1 TO MONITOR 2:

Sets the level of the Return 1 signal (effects) that is added to the monitor 2 mix. This is a mono mix of the left and right signals.

21.RETURN 1 PAN:

Sets the Return1 position in the L-R stereo field.

22.RETURN 1 TO L/R:

Sets the level of the Return 1 signal that is added to the L/R mix.

23.RETURN 2 TO MONITOR 1:

Sets the level of the Return 2 signal (effects) that is added to the Monitor 1 mix. This is a mono mix of the left and right signals.

24.RETURN 2 TO MONITOR 2:

Sets the level of the Return 2 signal (effects) that is added to the monitor 2 mix. This is a mono mix of the left and right signals.

25.RETURN 2 PAN:

Sets the Return 2 position in the L-R stereo field.

26.RETURN 2 TO L/R:

Sets the level of the Return 2 signal that is added to the L/R mix.

27.EFFECTS 1 SEND:

Adjusts the level of the Effects 1 mix sent to the Effects 1 Output (5). Unity gain is at the center detent position and +10 dB of gain in maximum.

6