DOD Bass30 manual Jam-A-Longª

Page 15

Jam-A-Longª

The Jam-A-Long™ feature lets you connect a tape or CD player to the Bass30 and mix the music with your bass signal. Connect from the headphone output of your tape or CD player to the Jam-A-Long™ input on the rear panel of the Bass30 using a 1/8” stereo cable. Both the recording and your bass signal will feed into your amplifier allowing you to Jam-A-Long with your favorite artists.

Warning: The Jam-A-Long™ input is not affected by the Bi-Amp function and will produce full range frequencies at both outputs.

11

Image 15

Contents Page Electromagnetic Compatibility Declaration of Conformity Table of Contents Introduction Guided Tour of the Bass30 Front Panel Section ONE OverviewPage Page Input Jack Connect your instrument to this jack Rear PanelMaking Connections Getting StartedPage Performance Mode Selecting a PresetSection TWO About the Bass30 Footswitches Accessing the Tuner Jam-A-Longª Section Three Edit Mode Editing a PresetUser Interface Page Page Expression Pedal Assignments Page Storing/Copying a Preset Section Four Effects Definitions Page Page Page Page Parameter Definitions Page Page Section Five Tutorial Creating a PresetPage Page Congratulations! You have successfully created a new Preset Section SIX Other Stuff Resetting the Bass30Calibrating the Expression Pedal Maintenance and ServiceSection Seven Appendix WarrantyPower Consumption 5.5 watts Specifications