DOD Bass30 manual

Page 8

is pressed, the display will either show two dashes --indicating that the Bi-Amp function is bypassed, or the currently selected crossover frequency if the Bi-Amp function is active. Rotate the Data Wheel to select the crossover frequency, or change the Bi-Amp status. The LED will remain lit when the Bi-Amp function is active. See Page 25 for more on Bi-Amping

7.Display - The Display serves three functions. In performance mode, the Display will indicate the Bank and Preset that is currently active. In edit mode, the Display will show the status or value of the effect or Parameter being edited. In Tuner mode, the display will show the note played.

8.Store - After editing a Preset, your modifications must be stored if you want the Bass30 to remember the changes that you made. When you change any aspect of a Preset, the Store LED will light indicating that you need to use the Store button to save the change.

9.Data Wheel - This knob is used to select the Preset in performance mode, and to increase or decrease the value of a Parameter in edit mode. It is also used to change the tuning reference in Tuner mode.

10.Expression Pedal - This pedal can be assigned to control one of 13 different Parameters in real time for each Preset. As you rock the pedal back and forth, the value of the assigned Parameter will change giving you expressive control over the effects.

4

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Page Electromagnetic Compatibility Declaration of Conformity Table of Contents Introduction Section ONE Overview Guided Tour of the Bass30 Front PanelPage Page Rear Panel Input Jack Connect your instrument to this jackGetting Started Making ConnectionsPage Section TWO About the Bass30 Performance ModeSelecting a Preset Footswitches Accessing the Tuner Jam-A-Longª User Interface Section Three Edit ModeEditing a Preset Page Page Expression Pedal Assignments Page Storing/Copying a Preset Section Four Effects Definitions Page Page Page Page Parameter Definitions Page Page Creating a Preset Section Five TutorialPage Page Congratulations! You have successfully created a new Preset Resetting the Bass30 Section SIX Other StuffMaintenance and Service Calibrating the Expression PedalWarranty Section Seven AppendixSpecifications Power Consumption 5.5 watts
Top Page Image Contents