8.
9.Store - This button is used to save changes to Presets. The LED above this button will light when a change has been made to effects or parameters in a preset indicating that you need to perform the Store function in order to retain your changes. See page 17 for more information on storing procedures.
10.Display - While in edit mode, the Display will show the status of the selected Effect, or the value of the selected Parameter. When an effect is bypassed, the display will indicate bypass by showing two dashes
Expression Pedal Assignments
The Bass30 allows you to assign the Expression Pedal to control various Parameters in real time. Only one Parameter at a time can be assigned to the Expression Pedal. The procedure for assigning a Parameter to the Expression Pedal is as follows:
1.- Press the Expression button once. The Expression LED, and the LED of the Parameter currently assigned to the Expression Pedal begins to flash.
2.- Rotate the Data Wheel to select the Effect or Parameter you wish to assign. The selection will be indicated by a flashing LED in the effect group, or parameter section. The Display will show a number between 1 and 13 representing the 12 possibilities. Your choices include:
1 | - Volume | 6 | - Bass Synth Level | 11 | - Delay Regeneration |
2 | - Wah | 7 | - Modulation Speed | 12 | - Delay Level |
3 | - Model Gain | 8 | - Modulation Depth | 13 | - Reverb Level |
4 | - Bass Synth Speed | 9 | - Bend Amount | ||
5 | - Bass Synth Amount | 10 - Modulation Level |
|
| |
15