Level - The Level will adjust the overall strength of effects in the Preset. The Level ranges from 0 to 99.
Bi-Amp - Bi-Amping is a term used to describe the process of using a two way crossover to add definition to your signal by separating the high frequencies from the low frequencies, and using separate amps and speakers to drive each frequency range. The Bass30 includes a programmable Crossover, and utilizes the Left/Mono, and Right Outputs for the Low and High Frequency Outputs. Once the Bi-Amp button is pressed, the LED will flash indicating that the Crossover frequency has been selected for editing, and the Display will show the current Crossover frequency. Rotate the Data Wheel to select the desired frequency for separation. All frequencies below the selected Crossover point will be sent to the Left/Mono Output, and frequencies above will be sent to the Right Output. This is a global function and will affect your instrument on every preset. Crossover Frequencies range from 6 (60 Hz.) to 2.0 (2000 Hz.).Pressing the Bi-Amp button again, or any other effect button will exit the Crossover edit mode, however, the Bi-Amp LED will remain lit if the Bi-Amp mode is active.
Warning: The Bi-amp function does not affect the Jam-A-Long input. The Jam-A-Long input will produce full range frequencies at both outputs.