DOD Bass30 manual Storing/Copying a Preset

Page 21

Storing/Copying a Preset

Once you have edited a Preset to your liking, you must store the changes in order for the Bass30 to remember your settings. There are three steps to storing a Preset.

1.Press the Store button once. The Store LED will flash and the User LED lights. The flashing LED is asking you to select the Preset location where your changes will be stored.

2.Use the Data Wheel to select the User Bank and Preset location for this new sound to be saved.

3.Press the Store button again. The new sound is now saved in the location you selected.

Note: This same procedure can be used to copy a Preset to a different User Preset location.

To abort the store function, press any footswitch.

17

Image 21

Contents Page Electromagnetic Compatibility Declaration of Conformity Table of Contents Introduction Guided Tour of the Bass30 Front Panel Section ONE OverviewPage Page Input Jack Connect your instrument to this jack Rear PanelMaking Connections Getting StartedPage Performance Mode Selecting a PresetSection TWO About the Bass30 Footswitches Accessing the Tuner Jam-A-Longª Section Three Edit Mode Editing a PresetUser Interface Page Page Expression Pedal Assignments Page Storing/Copying a Preset Section Four Effects Definitions Page Page Page Page Parameter Definitions Page Page Section Five Tutorial Creating a PresetPage Page Congratulations! You have successfully created a new Preset Section SIX Other Stuff Resetting the Bass30Calibrating the Expression Pedal Maintenance and ServiceSection Seven Appendix WarrantyPower Consumption 5.5 watts Specifications