DOD Bass30 manual Rear Panel, Input Jack Connect your instrument to this jack

Page 9

Rear Panel

LOW HIGH

A.Input Jack - Connect your instrument to this jack.

B.Jam-A-longª- This is used for playing along with your tapes and CD’s. Use a stereo cable with 1/8'' stereo plugs to connect the headphone output of your tape or CD player to this jack.

C.Headphone - This jack is used for connecting a pair of stereo headphones to the Bass30.

D.Left Output - Connect from this jack to the input of your amplifier for mono applications, or to the left channel of a stereo power amp for stereo applications, or to the power amp driving the low frequency speakers for bi-amp applications.

E.Right Output - Connect from this jack to a second amplifier, the right channel of a stereo power amp for stereo applications, or the power amp driving the high frequency speakers for bi-amp applications.

F.Power Jack - Connect only the PS750 power supply to this jack.

Image 9

Contents Page Electromagnetic Compatibility Declaration of Conformity Table of Contents Introduction Guided Tour of the Bass30 Front Panel Section ONE OverviewPage Page Input Jack Connect your instrument to this jack Rear PanelMaking Connections Getting StartedPage Performance Mode Selecting a PresetSection TWO About the Bass30 Footswitches Accessing the Tuner Jam-A-Longª Section Three Edit Mode Editing a PresetUser Interface Page Page Expression Pedal Assignments Page Storing/Copying a Preset Section Four Effects Definitions Page Page Page Page Parameter Definitions Page Page Section Five Tutorial Creating a PresetPage Page Congratulations! You have successfully created a new Preset Section SIX Other Stuff Resetting the Bass30Calibrating the Expression Pedal Maintenance and ServiceSection Seven Appendix WarrantyPower Consumption 5.5 watts Specifications