Calibrating the Expression Pedal
If the Expression Pedal ever has problems with controlling parameters through their full range, it may be necessary to
1.Disconnect the power from the Bass30.
2.Press and hold the Expression button and reconnect the power. Continue holding the Expression button until the display shows tr, then release it.
3.When the display reads tu, rock the pedal back to the toe up position and press the flashing number 1 Footswitch.
4.The display now reads td. Rock the Expression Pedal forward to the toe down position and press the flashing number 3 Footswitch.
The expression pedal is now calibrated for use with all presets.
If an er shows in the Display, an error has occurred in the Pedal Calibration and the Bass30 will repeat the Calibration prompts asking you to repeat steps 3 and 4.
The Expression Pedal can be disabled by pressing and holding the Expression button down for a few seconds.
Maintenance and Service
The Bass30 is a maintenance free device. There are no user serviceable parts inside of the unit. Opening the chassis will void your warranty. All service and repair must be performed by an authorized DOD service center. Should a problem arise with your Bass30, contact your local DOD dealer for return/repair procedures.
31