By continuing to hold down the mode key you pressed, you can move through the pages after entering the mode in the same way as by pressing the [CURSOR] down key.
In Effect mode, you can hold down the [SHIFT] key and press the [CURSOR] left or right key to jump to the selection page for each effect module.
Editing a parameter value
When the screen is displaying a page in which you can edit a parameter value, the value display will blink, and the edit icon will light. Now you can turn the dial to edit the value of the parameter.
Using the faders to select/set parameters
You can use the [TRACK] faders to edit parameters directly. Using the faders to edit is faster than using the [CURSOR] key and the dial.
Mixer mode: After pressing [MIXER], you can use the [CURSOR] up/down keys to select either “Level,” “Pan,”
Operation
“SendL,” or “SendR,” and use [TRACK] faders
In order to use this function, the System mode “Mixer” page setting “FadrCtrl” (Fader Control) must be turned “On.”
(→ p.63)
Effect mode: In Effect mode, effect parameters
In Effect mode, the [REC SELECT] keys are used as the effect module select keys.
If you use the faders to edit parameters, the current volume will no longer match the locations of the faders.
Canceling an edit (Undo/Redo)
After executing a track editing operation, you can use the Undo function to return to the condition prior to execut- ing the edit. When the Undo/Redo icon “ 
” is lit, you can hold down the [SHIFT] key and press the [MARK] key to undo the edit. After undoing, the Redo icon “ 
” will light, and you can use the same operation to Redo the edit, returning to the condition prior to executing Undo.
In order to use this function, the System mode “UndoSys” page setting “AutoUndo” must be turned “On.” (→ p.63)
Undo is maintained until the next time you record or per- form a track editing operation.
21