Korg PXR4 owner manual Using Marks to change the time location, Registering a mark

Page 35

keys to change the blinking unit. Moving toward the right will switch screens, allowing you to move in smaller units.

If “LocMoni” (→ p.63) is turned “On,” you will be able to lis- ten to the sound while you change the time location.

3Press the [EXIT] key to return to normal Locate mode.

When you press the [EXIT] key, you will return to the initial counter mode. To move from the middle of the song to the beginning, press the [REW] key.

3.Using Marks to change the time location

You can register a specific time location as a “mark,” and then move instantly to the registered time location. As a convenience for track editing, you can also register marks for the desired InTime, OutTime, ToTime, and EndTime, and select these marks when editing.

You can use marks to move even while the song is playing.

Registering a mark

In any mode, you can use the following procedure to reg- ister a mark.

1Move to the time location where you want to register a mark.

2Press the [STORE MARK] key, and the current time location will be saved as a new mark.

The number of the registered mark and the time loca- tion will be displayed for a certain length of time. You can register a mark in the same way by pressing the [STORE MARK] key even while a song is playing or being recorded.

Operation

The last time location in the song is automatically registered in the mark number “End.” This is useful when you want to move to the end of the song.

To save the marks that you registered in a song, press the [STOP] key to save the song. If you turn off the power with- out saving the song, the registered marks will not be saved. (→ p.14)

Changing the time location in order of the mark num- bers

Here’s how to change the current time location in the order of the registered mark numbers.

1Press the [MARK] key to enter Mark mode.

When you use the [MARK] key to enter Mark mode, the “Mark icon” will blink, and “–” will indicate the value. At this time the current time location has not yet been moved.

2Move from one mark to the next.

When you turn the dial, the value display will show the registered mark numbers and their time locations. At the same time, the current time location will change accordingly. Press the [EXIT] key to return to Locate mode.

Changing the time location in order of the locations reg- istered to each mark

Here’s how to change the current time location in the order of the time location of each registered mark.

1Move to the beginning of the song.

Hold down the [SHIFT] key and press the [FF] key. The value indicator will show “00.”

Mark number “00” is pre-registered as the beginning of the

33

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Page Handling Power supplyLocation Interference with other electrical devicesTable of Contents Creating/selecting a song Mixer adjustmentsUsing effects Viewing and changing the time locationMixdown Tempo/rhythm settingsSong editing Track editingExpTrack Exp/Cmp Expand/compress a Record Recording settings UndoSys Undo settingsLevel Volume level adjustment DelTrack Delete Track Delete data from a trackIndex Block diagram What is ?Troubleshooting Messages Rhythm pattern list SpecificationsPrinting conventions in this manual Main featuresTop panel Features of the PXR4 and their functionSide panels Bottom panel Front panelRear panel Display screen Effect assign indicator → p.67 Battery empty iconDisplay indicator Mixer indicatorOutput ConnectionsInserting/exchanging cards InputPower supply preparations Turning the power on/offTurning on the display backlight Turning the power onBattery empty indicator DM Project Turning the power offListening to the demo songs Demo song list Duck TeethLower the PXR4’s Master fader Turn the power onPreparations Connect the included AC adapter to the DC 4.5V jackSong named NEW Song has now been created Create a new song → p.23Check the input level Record → p.25Counter time will move to the beginning of the song Playback → p.31Selecting modes Selecting and setting parametersBasic operation Editing a parameter value Using the faders to select/set parametersCanceling an edit Undo/Redo Tuning your guitar TuningTo select the next-numbered song Creating/selecting a songCreating a new song Selecting a different songCharacter that can be changed will blink Changing the name of a songSelect the song whose name you want to change → 2. Selecting a different songConnect the input device RecordingRecording methods Recording on two tracksAdditional recording Using virtual tracks to recordSelect the track that you want to record Adjust the recording level of your input device, and recordPunch-in/out re-recording a portion of a track Refer to 1. Recording methods steps 1Specify the number of measures to be recorded Count-in recording after a specified number of mea- suresPress the Stop key to stop playback Combining tracks 1-4 onto two tracks Bounce combining multiple tracksSelect the track for recording When you are finished recording, press the Stop key to stopSelect the bounce mode Begin bounce recordingDouble-speed playback PlaybackPlayback Layering additional performances onto one trackChanging the current time location Switching the counter displayViewing and changing the time location Other types of playbackChanging the time location in order of the mark num- bers Using Marks to change the time locationRegistering a mark Select the mark that you want to delete Enter Mark modeDeleting a mark Move to the next or previous markSelect a mixer parameter Mixer adjustmentsUsing the faders to adjust mixer settings Using an insert effect Using effectsUsing effects Using a guitar effectType and chain configuration Using a final effectEditing an effect Effect programs and chainsChain 8 This chain contains a high-quality reverb Selecting the effect type and chainEditing an effect Chain 4 This chain is suitable for mic inputTo save an effect program Using the faders to edit the effectShortcuts using the REC Select keys Saving an effect programLoading a different effect user file file loaded at power-onLoading/saving an effect user file To save to a different effect user fileSelecting and playing a rhythm Tempo/rhythm settingsSetting the tempo and time signature Playing rhythmsSong Name naming a song Song editingSong editing operations Changing the tempo of the rhythmVirtual Track selecting a virtual track Track editingTrack editing operations Delete Song deleting a songCopy Track copying a track Select the OutTime When the display asks CopyOK?, press the CURSelect EditMode editing unit. For this example, select Fast Select the InTimeSelect EditMode. → Copy Track Select the InTime and OutTime Insert Track inserting a blank spaceErase Track erasing a track Select the DestTrkExecute the operation Here’s how to delete the In-Out region of trackDelete Track deleting a track Select ErsTrack. Then press the Cursor right keySelect Times Expansion/Compression expanding/compressing a trackSelect the SrcVTrk Copy Virtual Track copying to a virtual trackSelect the InTime, OutTime, ToTime, and EndTime Select PitchFixTrack As an example, here’s how to delete virtual track CDelete Virtual Track deleting a virtual track Select the DestVTrkCreating a stereo file Using the sub inputMixdown Recording onto a master tapeWindows users Saving to your computerMaking USB connections to your computer Creating a stereo fileMacintosh users Saving song files via card Formatting a card Format Recovering a damaged card Card RecoveryCard management Fr FreeTime The recordable time on the currently LocateP1. Location Counter counter display CounterNameSong Change the name of a song P1. Tempo tempo settingSystem P2. EditSong Song editing operationsCpyTrack CopyTrack Copy a track P3. EditTrk Track editing operationsDelSong Delete a song Track Select virtual tracksErsTrack Erase Track Erase data from a track InsTrack Insert Track Insert blank space into a trackExpTrack Exp/Cmp Expand/compress a region of a track DelTrack Delete Track Delete data from a trackCardInfo Information View card information P4. CardUtl Card-related functionsCpyV-Trk Copy a virtual track DelV-Trk Delete a virtual trackP5. System System-related settings UndoSys Undo settings Record Recording settingsSelectEffect Select an effect program P1. Effect Effect settingsEffect P6. USB comm USB connectionsP2. Tuner Tuner function Mixer Mark+ Effect Assign SendL Send level adjustment L chSendR Send level adjustment R ch + Display+ Bounce Store Mark REC SelectExit ShiftMaster Transport KeysFF Fast Forward RECREW Rewind DRIVE/LMT Block Dist Bass Distortion Limiter LimiterComp Bass Comp Ovdrv Bass OverdriveCABI/EQ Block MidEQ MID EQ 4x12 Vin 4x12 Vintage4x12 Mdn 4x12 Modern LowEQ LOW EQVntgDy Vintage Dynamic Tube2 TUBE2Hi-Gain1 HI-GAIN1 Hi-Gain1 HI-GAIN2Flanger Flanger StFlange Stereo Flanger ModDelay MOD Delay StModDly Stereo MOD DelayModulation Block Chorus Chorus StChorus Stereo ChorusWahUp WAH UP Phaser Phaser StPhaser Stereo PhaserPitchSft Pitch Shifter StPitch Stereo Pitch Shifter Octave OctaveAmbience Block NR/GATE Block Prog name Chain# For Effect Program ListFor each chain, the following effects can be selected Effect Chain ListNR/GATE Troubleshooting Master effect does not apply Effect does not applyCan’t record two tracks simultaneously Guitar/insert effect does not applyCard RhythmMessages Error messages No Card EvntFullOut MarkFullWr?STOP To-Endx2UndoOver Rhythm pattern list Analog/digital input/output specifications SpecificationsIncluded items Counter display IndexManual punch-in Manual punch-out Double-speed playback Half-speed playbackTuner Block diagramKorg INC
Top Page Image Contents