Operation
3. Tuning
The PXR4 has a
This lets you tune an instrument connected to the [GUI- TAR IN] jack or [LINE IN] jack, or by using the internal mic.
Tuning your guitar
1Connect your guitar to the [GUITAR INPUT] con- nector.
Set the [INPUT SELECT] switch to GUITAR.
If you want to tune using the internal mic, set this [INPUT SELECT] switch to MIC. If you want to tune an instrument connected to LINE, set this switch to LINE. However in the case of an instrument connected to LINE, only the L channel can be tuned.
2Enter Tuner mode.
While stopped, press the [EFFECT/TUNER] key to enter Tuning mode.
If EFFECT ASSIGN has been assigned, press the [EFFECT/TUNER] key once again to enter Tuner mode.
| 3 Tune your instrument. |
| Make sure that your guitar is connected to the [GUI- |
| TAR INPUT] jack, and play a string on your guitar. |
| The character display area of the screen will function |
22 | as a tuning meter, and will display the note name. |
|
Tune the string while watching the amount of tuning difference (displayed in units of cents) and the meter in the display.
The reference pitch frequency is A=440 Hz.
When the tuning is correct
If you do not want the sound to be heard while tuning, set the [MASTER] fader to 0.
4Exit Tuner mode.
Press the [EXIT] key to exit Tuner mode.