Korg PXR4 4x12 Vin 4x12 Vintage, 4x12 Mdn 4x12 Modern, LowEQ LOW EQ, MidEQ MID EQ, HighEQ High EQ

Page 77

4x12 Vin (4x12 VINTAGE)

This cabinet model simulates a closed back 30W enclosure with four 12-inch speakers.

*The parameters are the same as “1x8 TWEED.”

4x12 Mdn (4x12 MODERN)

This cabinet model simulates a closed back 75W enclosure with four 12-inch speakers.

*The parameters are the same as “1x8 TWEED.”

2.4BAND EQ

Six types of 4-band graphic equalizer are provided, each with different center frequency settings for the various bands.

LowEQ (LOW EQ)

Bands 1–4 correspond to 80 Hz, 120 Hz, 250 Hz, and 550 Hz.

1.	80Hz	[–10...	+10]: Band 1 level
2.	120Hz	[–10...	+10]: Band 2 level
3.	250Hz	[–10...	+10]: Band 3 level
4.	550Hz	[–10...	+10]: Band 4 level
5.	LEVEL	[0...10]: Adjusts the overall level.

MidEQ (MID EQ)

Bands 1–4 correspond to 250 Hz, 550 Hz, 1 kHz, and 4 kHz.

*The parameters are the same as “LOW EQ.”

HighEQ (HIGH EQ)

Bands 1–4 corresponds to 640 kHz, 2 kHz, 6.4 kHz, and 12 kHz.

*The parameters are the same as “LOW EQ.”

WideEQ1 (WIDE EQ1)

Bands 1–4 correspond to 120 Hz, 250 Hz, 2 kHz, and 10 kHz.

*The parameters are the same as “LOW EQ.”

Effect parameters

WideEQ2 (WIDE EQ2)

Bands 1–4 correspond to 100 Hz, 550 Hz, 1.2 kHz, and 4 kHz.

*The parameters are the same as “LOW EQ.”

WideEQ3 (WIDE EQ3)

Bands 1-4 correspond to 80 Hz, 125 Hz, 640 Hz, and 1.5 kHz.

*The parameters are the same as “LOW EQ.”

3.BASS CABINET

The Bass Cabinet block simulates a wide range of speaker and cabinet characters, from vintage tube amps to modern solid state amps.

When recording on the PXR4, this block can give your instru- ment a sense of presence as though you were playing through an amp.

Solid1 (SOLID1)

This is an all-around type of amp. It is also suitable for slap/ pop playing styles.

1.	-----(BLANK)	.....................
2.	MIX	[1...10]: Adjusts the output level when the
		cabinet is used.
3.	PRESENCE	[–12...+12]: Adjusts the volume of the high-fre-
4.	-----(BLANK)	quency range.
4.	-----(BLANK)	.....................
5.	-----(BLANK)	.....................

If the sound is distorted, slightly lower the LEVEL and PRESENCE settings.

Solid2 (SOLID2)

This amp has a hard and tight tone.

*The parameters are the same as “SOLID1.”

Tube1 (TUBE1)

This is an old-style amp with a warm low end response. * The parameters are the same as “SOLID1.”

75

Image 77

Contents Page Location Power supplyInterference with other electrical devices HandlingTable of Contents Using effects Mixer adjustmentsViewing and changing the time location Creating/selecting a songSong editing Tempo/rhythm settingsTrack editing MixdownLevel Volume level adjustment Record Recording settings UndoSys Undo settingsDelTrack Delete Track Delete data from a track ExpTrack Exp/Cmp Expand/compress aTroubleshooting Messages What is ?Rhythm pattern list Specifications Index Block diagramPrinting conventions in this manual Main featuresTop panel Features of the PXR4 and their functionSide panels Bottom panel Front panelRear panel Display screen Display indicator Battery empty iconMixer indicator Effect assign indicator → p.67Inserting/exchanging cards ConnectionsInput OutputPower supply preparations Turning the power on/offTurning on the display backlight Turning the power onBattery empty indicator Listening to the demo songs Turning the power offDemo song list Duck Teeth DM ProjectPreparations Turn the power onConnect the included AC adapter to the DC 4.5V jack Lower the PXR4’s Master faderSong named NEW Song has now been created Create a new song → p.23Check the input level Record → p.25Counter time will move to the beginning of the song Playback → p.31Selecting modes Selecting and setting parametersBasic operation Editing a parameter value Using the faders to select/set parametersCanceling an edit Undo/Redo Tuning your guitar TuningCreating a new song Creating/selecting a songSelecting a different song To select the next-numbered songSelect the song whose name you want to change Changing the name of a song→ 2. Selecting a different song Character that can be changed will blinkRecording methods RecordingRecording on two tracks Connect the input deviceAdditional recording Using virtual tracks to recordPunch-in/out re-recording a portion of a track Adjust the recording level of your input device, and recordRefer to 1. Recording methods steps 1 Select the track that you want to recordSpecify the number of measures to be recorded Count-in recording after a speciﬁed number of mea- suresPress the Stop key to stop playback Combining tracks 1-4 onto two tracks Bounce combining multiple tracksSelect the bounce mode When you are ﬁnished recording, press the Stop key to stopBegin bounce recording Select the track for recordingPlayback PlaybackLayering additional performances onto one track Double-speed playbackViewing and changing the time location Switching the counter displayOther types of playback Changing the current time locationChanging the time location in order of the mark num- bers Using Marks to change the time locationRegistering a mark Deleting a mark Enter Mark modeMove to the next or previous mark Select the mark that you want to deleteSelect a mixer parameter Mixer adjustmentsUsing the faders to adjust mixer settings Using effects Using effectsUsing a guitar effect Using an insert effectEditing an effect Using a ﬁnal effectEffect programs and chains Type and chain conﬁgurationEditing an effect Selecting the effect type and chainChain 4 This chain is suitable for mic input Chain 8 This chain contains a high-quality reverbShortcuts using the REC Select keys Using the faders to edit the effectSaving an effect program To save an effect programLoading/saving an effect user ﬁle ﬁle loaded at power-onTo save to a different effect user ﬁle Loading a different effect user ﬁleSetting the tempo and time signature Tempo/rhythm settingsPlaying rhythms Selecting and playing a rhythmSong editing operations Song editingChanging the tempo of the rhythm Song Name naming a songTrack editing operations Track editingDelete Song deleting a song Virtual Track selecting a virtual trackCopy Track copying a track Select EditMode editing unit. For this example, select Fast When the display asks CopyOK?, press the CURSelect the InTime Select the OutTimeErase Track erasing a track Insert Track inserting a blank spaceSelect the DestTrk Select EditMode. → Copy Track Select the InTime and OutTimeDelete Track deleting a track Here’s how to delete the In-Out region of trackSelect ErsTrack. Then press the Cursor right key Execute the operationSelect Times Expansion/Compression expanding/compressing a trackSelect the InTime, OutTime, ToTime, and EndTime Copy Virtual Track copying to a virtual trackSelect PitchFix Select the SrcVTrkDelete Virtual Track deleting a virtual track As an example, here’s how to delete virtual track CSelect the DestVTrk TrackMixdown Using the sub inputRecording onto a master tape Creating a stereo ﬁleMaking USB connections to your computer Saving to your computerCreating a stereo ﬁle Windows usersMacintosh users Saving song ﬁles via card Formatting a card Format Recovering a damaged card Card RecoveryCard management P1. Location Counter counter display LocateCounter Fr FreeTime The recordable time on the currentlySystem P1. Tempo tempo settingP2. EditSong Song editing operations NameSong Change the name of a songDelSong Delete a song P3. EditTrk Track editing operationsTrack Select virtual tracks CpyTrack CopyTrack Copy a trackErsTrack Erase Track Erase data from a track InsTrack Insert Track Insert blank space into a trackExpTrack Exp/Cmp Expand/compress a region of a track DelTrack Delete Track Delete data from a trackCpyV-Trk Copy a virtual track P4. CardUtl Card-related functionsDelV-Trk Delete a virtual track CardInfo Information View card informationP5. System System-related settings UndoSys Undo settings Record Recording settingsEffect P1. Effect Effect settingsP6. USB comm USB connections SelectEffect Select an effect programP2. Tuner Tuner function Mixer MarkSendR Send level adjustment R ch SendL Send level adjustment L ch+ Display + Effect Assign+ Bounce Exit REC SelectShift Store MarkMaster Transport KeysFF Fast Forward RECREW Rewind DRIVE/LMT Block Comp Bass Comp Limiter LimiterOvdrv Bass Overdrive Dist Bass DistortionCABI/EQ Block 4x12 Mdn 4x12 Modern 4x12 Vin 4x12 VintageLowEQ LOW EQ MidEQ MID EQHi-Gain1 HI-GAIN1 Tube2 TUBE2Hi-Gain1 HI-GAIN2 VntgDy Vintage DynamicModulation Block ModDelay MOD Delay StModDly Stereo MOD DelayChorus Chorus StChorus Stereo Chorus Flanger Flanger StFlange Stereo FlangerPitchSft Pitch Shifter StPitch Stereo Pitch Shifter Phaser Phaser StPhaser Stereo PhaserOctave Octave WahUp WAH UPAmbience Block NR/GATE Block Prog name Chain# For Effect Program ListFor each chain, the following effects can be selected Effect Chain ListNR/GATE Troubleshooting Can’t record two tracks simultaneously Effect does not applyGuitar/insert effect does not apply Master effect does not applyCard RhythmMessages Error messages Out EvntFullMarkFull No CardWr?STOP To-Endx2UndoOver Rhythm pattern list Analog/digital input/output speciﬁcations SpeciﬁcationsIncluded items Counter display IndexManual punch-in Manual punch-out Double-speed playback Half-speed playbackTuner Block diagramKorg INC