Korg PXR4 owner manual Expansion/Compression expanding/compressing a track, Select Times

Page 50

Operation

4Select the “DestTrk.”

Use the dial to select the track number from which data will be deleted. For this example, select track “1.” Then press the [CURSOR] right key.

5Select the “EditMode.” (→ Copy Track)

6Select the “InTime” and “OutTime.”

For each point, use the dial to select a mark number that you registered. Then press the [CURSOR] right key.

By pressing the [CURSOR] down key, you can edit the time location of the selected mark. You can also press the [PLAY] key to play back the sound for approximately two seconds from the selected time location.

7Execute the operation.

When the display asks “DelOK?,” press the [CUR- SOR] right key to execute the operation. When the data has been deleted, the display will indicate “Fin- ish!”

8Press the [PLAY] key to play back, and verify that the operation occurred as you intended.

You can press the [UNDO] key to return to the state prior to executing. (→ p.21)

Expansion/Compression – expanding/compressing a track

This operation expands or compresses the specified region (In–Out) of recorded track data, and places it in a specified location (To–End). The data that follows the expanded/ compressed data (i.e., the data following the End point) will be shifted toward the end of the song. You can select whether or not the pitch will be converted.

48

In

Out

 

 

 

 

 

SrcTrk

 

 

 

 

 

 

 

 

 

 

A B C ...

Times

 

 

 

 

 

To

 

 

 

 

 

DestTrk

 

 

 

 

 

 

 

 

 

A B C ... A B C ... A B C ...

As an example, here’s how the In–Out region of track 1 can be converted (without changing the pitch) to the length of the To–End region of track 2, and copied there three times.

1Register marks for the desired In, Out, To, and End time locations. (→ p.35)

2Display the “EditTrk” (track edit) page. (→ Copy Track 2 )

3Select “ExpTrack” (expand/compress track). Select “ExpTrack.” Then press the [CURSOR] right key.

4Select the “SrcTrk.”

Use the dial to select the track number containing the data you want to expand or compress. For this exam- ple, select track “1.” Then press the [CURSOR] right key.

5Select the “DestTrk.”

Use the dial to select the track number into which the expanded/compressed data will be placed. For this example, select track “2.” Then press the [CURSOR] right key.

6Select “Times.”

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Page Interference with other electrical devices Power supplyLocation HandlingTable of Contents Viewing and changing the time location Mixer adjustmentsUsing effects Creating/selecting a songTrack editing Tempo/rhythm settingsSong editing MixdownDelTrack Delete Track Delete data from a track Record Recording settings UndoSys Undo settingsLevel Volume level adjustment ExpTrack Exp/Cmp Expand/compress aRhythm pattern list Specifications What is ?Troubleshooting Messages Index Block diagramMain features Printing conventions in this manualFeatures of the PXR4 and their function Top panelSide panels Bottom panel Front panelRear panel Display screen Mixer indicator Battery empty iconDisplay indicator Effect assign indicator → p.67Input ConnectionsInserting/exchanging cards OutputTurning the power on/off Power supply preparationsTurning on the display backlight Turning the power onBattery empty indicator Demo song list Duck Teeth Turning the power offListening to the demo songs DM ProjectConnect the included AC adapter to the DC 4.5V jack Turn the power onPreparations Lower the PXR4’s Master faderCreate a new song → p.23 Song named NEW Song has now been createdRecord → p.25 Check the input levelPlayback → p.31 Counter time will move to the beginning of the songSelecting modes Selecting and setting parametersBasic operation Editing a parameter value Using the faders to select/set parametersCanceling an edit Undo/Redo Tuning Tuning your guitarSelecting a different song Creating/selecting a songCreating a new song To select the next-numbered song→ 2. Selecting a different song Changing the name of a songSelect the song whose name you want to change Character that can be changed will blinkRecording on two tracks RecordingRecording methods Connect the input deviceUsing virtual tracks to record Additional recordingRefer to 1. Recording methods steps 1 Adjust the recording level of your input device, and recordPunch-in/out re-recording a portion of a track Select the track that you want to recordSpecify the number of measures to be recorded Count-in recording after a specified number of mea- suresPress the Stop key to stop playback Bounce combining multiple tracks Combining tracks 1-4 onto two tracksBegin bounce recording When you are finished recording, press the Stop key to stopSelect the bounce mode Select the track for recordingLayering additional performances onto one track PlaybackPlayback Double-speed playbackOther types of playback Switching the counter displayViewing and changing the time location Changing the current time locationChanging the time location in order of the mark num- bers Using Marks to change the time locationRegistering a mark Move to the next or previous mark Enter Mark modeDeleting a mark Select the mark that you want to deleteSelect a mixer parameter Mixer adjustmentsUsing the faders to adjust mixer settings Using a guitar effect Using effectsUsing effects Using an insert effectEffect programs and chains Using a final effectEditing an effect Type and chain configurationChain 4 This chain is suitable for mic input Selecting the effect type and chainEditing an effect Chain 8 This chain contains a high-quality reverbSaving an effect program Using the faders to edit the effectShortcuts using the REC Select keys To save an effect programTo save to a different effect user file file loaded at power-onLoading/saving an effect user file Loading a different effect user filePlaying rhythms Tempo/rhythm settingsSetting the tempo and time signature Selecting and playing a rhythmChanging the tempo of the rhythm Song editingSong editing operations Song Name naming a songDelete Song deleting a song Track editingTrack editing operations Virtual Track selecting a virtual trackCopy Track copying a track Select the InTime When the display asks CopyOK?, press the CURSelect EditMode editing unit. For this example, select Fast Select the OutTimeSelect the DestTrk Insert Track inserting a blank spaceErase Track erasing a track Select EditMode. → Copy Track Select the InTime and OutTimeSelect ErsTrack. Then press the Cursor right key Here’s how to delete the In-Out region of trackDelete Track deleting a track Execute the operationExpansion/Compression expanding/compressing a track Select TimesSelect PitchFix Copy Virtual Track copying to a virtual trackSelect the InTime, OutTime, ToTime, and EndTime Select the SrcVTrkSelect the DestVTrk As an example, here’s how to delete virtual track CDelete Virtual Track deleting a virtual track TrackRecording onto a master tape Using the sub inputMixdown Creating a stereo fileCreating a stereo file Saving to your computerMaking USB connections to your computer Windows usersMacintosh users Saving song files via card Formatting a card Format Recovering a damaged card Card RecoveryCard management Counter LocateP1. Location Counter counter display Fr FreeTime The recordable time on the currentlyP2. EditSong Song editing operations P1. Tempo tempo settingSystem NameSong Change the name of a songTrack Select virtual tracks P3. EditTrk Track editing operationsDelSong Delete a song CpyTrack CopyTrack Copy a trackInsTrack Insert Track Insert blank space into a track ErsTrack Erase Track Erase data from a trackDelTrack Delete Track Delete data from a track ExpTrack Exp/Cmp Expand/compress a region of a trackDelV-Trk Delete a virtual track P4. CardUtl Card-related functionsCpyV-Trk Copy a virtual track CardInfo Information View card informationP5. System System-related settings Record Recording settings UndoSys Undo settingsP6. USB comm USB connections P1. Effect Effect settingsEffect SelectEffect Select an effect programP2. Tuner Tuner function Mark Mixer+ Display SendL Send level adjustment L chSendR Send level adjustment R ch + Effect Assign+ Bounce Shift REC SelectExit Store MarkTransport Keys MasterFF Fast Forward RECREW Rewind DRIVE/LMT Block Ovdrv Bass Overdrive Limiter LimiterComp Bass Comp Dist Bass DistortionCABI/EQ Block LowEQ LOW EQ 4x12 Vin 4x12 Vintage4x12 Mdn 4x12 Modern MidEQ MID EQHi-Gain1 HI-GAIN2 Tube2 TUBE2Hi-Gain1 HI-GAIN1 VntgDy Vintage DynamicChorus Chorus StChorus Stereo Chorus ModDelay MOD Delay StModDly Stereo MOD DelayModulation Block Flanger Flanger StFlange Stereo FlangerOctave Octave Phaser Phaser StPhaser Stereo PhaserPitchSft Pitch Shifter StPitch Stereo Pitch Shifter WahUp WAH UPAmbience Block NR/GATE Block Effect Program List Prog name Chain# ForEffect Chain List For each chain, the following effects can be selectedNR/GATE Troubleshooting Guitar/insert effect does not apply Effect does not applyCan’t record two tracks simultaneously Master effect does not applyRhythm CardMessages Error messages MarkFull EvntFullOut No CardWr?STOP To-Endx2UndoOver Rhythm pattern list Specifications Analog/digital input/output specificationsIncluded items Index Counter displayDouble-speed playback Half-speed playback Manual punch-in Manual punch-outBlock diagram TunerKorg INC
Top Page Image Contents