Fostex LR16 manual Control unit Master channel, SUB in jacks and control, Monitor section

Model LR16 [Names and functions]
	Control unit (Master channel)
		(17) [SUB IN] jacks and control
		You can connect a CD player, MD player, etc to the
		jacks and adjust the input level using the control. By
		default, the input signals from the [SUB IN] jacks are
		assigned to input channel 15 and 16, however, you
		can change the assignment to any desired channel
		pairs using the "Input" menu of the MENU mode.
		(18) Monitor section
	17
18	19		a
		c	b
	20	d
	21		e
22	23
			f
	24	(a) [MONITOR L/R] jacks
	25	You can connect a monitor amplifier or powered
		monitor speakers to these jacks. The output level
		can be adjusted by the [MONITOR] control.
26	27	(b) [PHONES] jack
		Connects headphones. You can adjust the output
28		level using the [PHONES] and [MONITOR] controls.
	29	(c) [PHONES] control
		Adjusts the output level of the [PHONE] jack.
		(d) [MONITOR LEVEL] indicators
		Indicate the output level of the monitor signal se-
		lected by the [MONITOR SELECT] switch (or the solo
		monitor signal).
		(e) [SOLO] indicator
30	31	When at least one of the [SOLO] switches is set to
		ON, the [SOLO] indicator slowly flashes, while the
		solo monitor signal is output from the [MONITOR
		(L/R)] and [PHONES] jacks.
		(f) [MONITOR SELECT] switch
		Selects signals to be monitored. You can select from
		Groups 1-2, Groups 3-4, Stereo and Effect return by
		pressing the switch as many time as required.
		When solo monitor is active, the selection is not ef-
		fective.

24